caution
Member
my 07 xrs keeps killing plug on pull cord side.any help would be great......
dead plug
- Thread starter caution
- Start date
my 1000 is doing the same thing but the pto side. wanna sell me your pto side of your engine and i will give you mine. lol
i am going to try uping the idle a bit as it is about 5-700 rpm to low and see what happens have heard lots of guys having to do that to get them to quit fouling.
rtk
Active member
check spark plug boot for a broken connecter inside they tend to crack from vibration
tex78
Active VIP Member
Also could be isoflux grease geting on the plug. Don't fire worth a hoot with the grease on them.
Mabe a pic of the plug from the mag side
Sent from my HTC-Z710a using Tapatalk
Mabe a pic of the plug from the mag side
Sent from my HTC-Z710a using Tapatalk
Dmf
Active VIP Member
pull fuel the fuel feed line off the carburetor, see if fuel is still trickling out, it shouldnt but if the rubber diaghram is torn it will and will fill the cylinder with extra fuel
- Thread starter
- #8
caution
Member
thanks done the same.no problems since.
did that to mine and still fouling plug. runs about 3 min and then you can hear it as the plug starts to go out. change plugs and fire it up and all is good. doesn't matter what type of plug either done 2 sets of iridiums now and i don't know how many cheap azzed plugs it has fouled.
ran great all last spring no issues nothing changed since then. and now it eats plugs
Similar threads
