clutching question

[crisscross1]

this looks like an Artic cat, but it is the same

Cat and Suzuki have a wet clutch that drives a cvt??

 

[doorfx]

Now that we have established that it is not a can am and what a wet clutch is!! Lol get an M109r injector and copperhead vdi. Get the dyno tuning and have Lyle write a map for your application. As stated don't run it lean or you'll burn it down. As far as clutching goes PSC OR AIRDAM

 

[KWIK RACING INC.]

spelling error! QSC.........you pressed the wrong keys....lol
all good thou... yes i agree... get it dynoed...

 

[doorfx]

Nope don't think so! Lol

 

[doorfx]

Another couple things you can do-
Check/set your tps
Check for codes

 

[KWIK RACING INC.]

lol...nice! i thought since you mentoned Airdam clutching, the other clutch everybody is using is a QSC ...Quad Shop Customs.. so since it looked similiar, i thought you spelled it wrong...
but....
ii went to PSC's site and they are trucks and such? did not see anything on quads.. PCS does clutch stuff for quads?

 

[doorfx]

Papa_slap clutches lol

 

[crisscross1]

OK guys from lyle's finger tips here is what he had to say

You can run the stock injector as well as the stock pipe. If you let us know what you have on your machine, we can preload it. You shouldn’t need to dyno it.


You can fully immerse it in water with no issues. Only time we have a problem is if you mount it so the toggle boot on the switch is rubbing, and rips open. Otherwise, you’ll have no issues.

You can remove the shims. Usually that gives you better bottom end though, since it’s like being in a lower gear.

Lyle

Thanks to everyone but this seems to the cheaper way to go for now and I'm going to try it out, now where is my wallet $$$

 

[cookgio]

you can also change your clutches to a dry clutch better setup less rolling weight and it is a very cheap upgrade. there are a ton of videos on youtube check em out it a great mod.

 

[kingkris06]

you can also change your clutches to a dry clutch better setup less rolling weight and it is a very cheap upgrade. there are a ton of videos on youtube check em out it a great mod.

are you talking about the wet clutch delete from air dam (///) ? changes the clutch to somerhi ing similar to the polaris xp clutch system .

 

[whoDEANie]

you can also change your clutches to a dry clutch better setup less rolling weight and it is a very cheap upgrade. there are a ton of videos on youtube check em out it a great mod.

The greasless roller setup is cheep, but the wet clutch delete is spendy at about $1250.

 

[doorfx]

That clutch/cvt on his king is a greaseless roller setup!!!! The pics I posted above is a Suzuki motor. The 700 has a bearing retainer cage that is the only difference. If you want to do it on the cheap drill your rollers to 15 grams add a 2mm primary shim and reclock your secondary to B2. Total cost $2 for the shim. It will wheelie over backwards.