Clipping the AXYS Track

[Teth-Air]

anyone have a tool in revy, sicamous or okanagan area?

Sicamous this weekend if you need one brought out. PM me though as I may not see a post here.

 

[zulu19]

thanks for the offer but stuck at work

 

[Powder Hoist]

500+ miles on 163 3' 850 track looks like new.

 

[TDR]

Track on my 850 is good too. Also put a 19 track on last years 800. No issues.

 

[skid]

I have an 18’ 155 axys with about 2000km on it and the track has pretty significant wear on it under each lug, my question is has anyone install the clips on a track with wear to try to get more life out of it or will the clips even fasten tight enough? Hoping to make it through this next season on this track and purchase a new one next season.

 

[Kyle89]

I have an 18’ 155 axys with about 2000km on it and the track has pretty significant wear on it under each lug, my question is has anyone install the clips on a track with wear to try to get more life out of it or will the clips even fasten tight enough? Hoping to make it through this next season on this track and purchase a new one next season.

I clipped the rest of my track around that same Km. Iv had no more wear from what I can tell

 

[Rene G]

Does the ‘19 2.6 track have wear issues? Maybe I should be clipping mine...

 

[TDR]

No problem with the 19. They put the clips on the lugs and that fixed it.

 

[Bogger]

I have an 18 RMK with 4400km guess I should have a good close look at my track, I need to replace the sliders so maybe I should be clipping the track while I'm at it.

 

[AreWeThereYet]

The sks comes fully clipped

 

[Rhodesie]

The sks comes fully clipped

just fully clipped the wife's 2021 165 2.75". didn't really need to but chris @ source innovations in calgary has all this stuff in stock usually.
already had the tool from doing our 18's anyway. ordered some short reach brake handles and the qd2 drive protectors so ordered clips while i was at it.

 

[skid]

I clipped the rest of my track around that same Km. Iv had no more wear from what I can tell

Good to know, I’ll order clips and tool and get it done ASAP. Bogger I’d be curious to hear how yours has held out at 4400km.