brute force 2006 650 lack of power

[meteor1960]

i was wondering if anyone had any tips or ideas why my quad is hesitase when you first hit the gas

 

[Black08Brute]

I was told that it is a safety thing. My 08 does the exact same thing if you punch it it has a split second delay then watch out but it is suppose to be for when you hit it by accident. If you install a dynatec cdi on the 650's I believe it goes away.

 

[meteor1960]

i was also told that the dynatec cdi takes off the revers limiter do you no if this is true?

 

[monster sledder]

yes no more pushing the override button to back up.

 

[tko sled ed]

I ordered my dynatek cdi for my prowler should have it early next week I'll let you know how it is.

 

[meteor1960]

well i went quading today and was haveing a great day towards the end of the day we were playing in this small river for a about a hour then just as we were leaving it started to run like ch!t and backfireing and ended up having to get it towed home anyidea why this would of happened

 

[Black08Brute]

It could be that your front plug wire where it connects to your spark plug got wet and that would cause that problem.

Dry it out good and put a good amount of dielectric grease in the boot itself.

Let us know what the problem was.

 

[meteor1960]

well i tryed that and no luck same problem and now i noticed that my belt light wont go off and it flashes between 2wd and 4wd . like my quad starts and idles but as soon as you rev it up it starts to backfire

 

[crazy_wheeler]

You've got water in one of the electrical connectors some place and that is causing your problems. You will need to get everything good and dry. I would suggest taking connectors apart, drying them out with a shot of electrical contact cleaner, applying die electric grease and then connecting again. Also check connections at the coils and make sure all ground points are good. A dyna tech ignition module for your machine will advance the timing 5°, override reverse rev limiter, rev limit will be 9200 stock is 8500 and the belt limp home mode switch will be useless. I also have a dyna tech module for sale that will fit your machine, pm me if your interested.