Boondockers RG M8 controller #'s

[DaltonW]

Any body able to give me there controller #'s as a good start point, I have a 2010 RG intercooled kit. Purchased it used, but all the fuel #'s are at 00, in the lo, med, hi. just looking for some starting numbers then fine tune from there.
Thx

 

[800snopro]

Im in the same situation but need pg #'s. Same sled too


Sent from my iPhone using

 

[cnelson6]

Have you tried calling boondocker at all? I found I have better luck with boondocker USA than canada for answers also.

 

[mareshow]

Have you tried calling boondocker at all? I found I have better luck with boondocker USA than canada for answers also.

This, just tell them the elevation you ride at they should be able to provide some base numbers at the very least

 

[butters]

It's all on the website isn't it?

 

[Modman]

It's all on the website isn't it?

Last time I checked the website didn't have the PDF's for the kits anymore, I would just try calling them first. Reid Hedlund was leading the charge for Boondocker Canada I thought, I've spoken with him before, and the address is still in Midway where he is based. I'm assuming its still the case, usually he was good to deal with in the past.

The BD box values will be specific to each sled, mainly based on elevation and variations in fuel pressure. To get it dialed in better, you will need to do some plug checks, and invest in an A/F or EGT gauge, and fuel pressure regulator/gauge if you don't already have one.

 

[wiffler79]

give lindermen a call at arctic edge motorsports, buddy got numbers for a m1000 from him and he is spot on.