Boondocker #s for 08 M1000

[Captain Undies]

Does anyone out there have a good base set of numbers for an 08 M1000 with the boondocker control box? The set up I have right now is a d&d y pipe, can, and muffler. I also have the air box tossed and k&n filter pods on it. Ive got it realativley tuned in but i would sure like to know if my numbers are in close aspect with some of the others out there.

 

[shiznitt100]

pm foothillsm8, his cousin has kinda same set up, he has a few set of numbers, he also took alot of upgrades off his 1000 due to poor running in deep fresh snow, seemed to be running on 1 cyl.

 

[Captain Undies]

Thanks ill do that,........

 

[W O T]

Here's what I was recomended by D&D on my XF1000 with the similar setup and a reflash.
3000 -3 -3 -4
5000 -4 -7 -7
6200 -9 -10 -11
6500 -4 -5 -11
6850 -6 -6 -10
7250 4 6 8
7850 4 10 20

Like I said earlier in a similar post I don't have any experience with a boondocker, but I put those #'s to her last night and it ran real good. Might have a bit of fine tuning yet though.
I run a 07' XF1000 with D&D Y-pipe, Pipe, Can, and Firebreather intake. Just bought it so...

 

[mphfreak]

Those look a bit Lean for the 08 ECU, maybe not so for the 09 Ecu

 

[slomo]

Those look a bit Lean for the 08 ECU, maybe not so for the 09 Ecu

thats why they say starting piont and you will find people dont usually share #'s because each machine even if it's the same year and model can be so different.what works for little jonny, burnt your motor down and now your pissed,so call d+d check their website start with what they recomend,plug read,plug read and plug read again as well as checking piston wash to dial yours in.it will take a while but in the end you will learn to become more comftable with your bd box and know that its not going to burn down on you just my 2 cents