Blown Engine on 04 Summit 800

[bhowes]

Congrats again rowdy girl and be proud that is an awesome job you have done i know you have had some great advice on here so here is one more thing for your break in fill your oil resivore right to the bottom of the fill neck and after 30- 40 kilo's check the level it should have drop 3/4 -1" below where you filled it if not you need to make an adjustment to your oil pump cable (not so easy on the hill) pack 1/2 litre of oil to add to your mixed fuel in case you burn the whole tank and need your spare fuel to ride out atlas still has lots of snow and is a good place to go for your break in rip pm me if your need help on the cable adjustment next week

P.s loved your start up vid was that a plumbing shop you where working in ? recognized some off the equipment laying around

 

[~Rowdy~]

and whats wrong with the south

It's the south...that's whats wrong, haha.

Congrats again rowdy girl and be proud that is an awesome job you have done i know you have had some great advice on here so here is one more thing for your break in fill your oil resivore right to the bottom of the fill neck and after 30- 40 kilo's check the level it should have drop 3/4 -1" below where you filled it if not you need to make an adjustment to your oil pump cable (not so easy on the hill) pack 1/2 litre of oil to add to your mixed fuel in case you burn the whole tank and need your spare fuel to ride out atlas still has lots of snow and is a good place to go for your break in rip pm me if your need help on the cable adjustment next week

P.s loved your start up vid was that a plumbing shop you where working in ? recognized some off the equipment laying around

Thanks so much! Ok that's good to know! I'm going to also bring a torque wrench and re-torque on the hill.

Yep! It's a Plumbing, heating and HVAC shop. Good eye!

 

[~Rowdy~]

I also found an "extra" hose in my rubber maid clearly for oil...gonna have to figure out where the heck that goes before I head out this weekend. Whoopsie!

 

[fatguy1]

I also found an "extra" hose in my rubber maid clearly for oil...gonna have to figure out where the heck that goes before I head out this weekend. Whoopsie!

??? could it be from the top of the oil tank to the port in the center of the block just above the oil injection pump?

 

[~Rowdy~]

No idea. I have to look at it and look in my manual. I know where the hose I have should go, but I don't know wtf I hooked up to where this is supposed to go.

 

[fatguy1]

I know where the hose I have should go, but I don't know wtf I hooked up to where this is supposed to go.

Where do you think it belongs?

 

[~Rowdy~]

Where do you think it belongs?

On the thingy by the oil pump!? HAHAHA...I'll go look and try to take a pic with my phone.

 

[fatguy1]

On the thingy by the oil pump!? HAHAHA...I'll go look and try to take a pic with my phone.

Right above the oil pump there is a steel 90 degree "fitting" that points toward the oil tank. Then almost half way down on the oil tank is another fitting that it should connect to.

 

[~Rowdy~]

Right above the oil pump there is a steel 90 degree "fitting" that points toward the oil tank. Then almost half way down on the oil tank is another fitting that it should connect to.

Yep that would be the thingy I'm talking about. I tried to take a pic with my phone, but not working out. I'm going to get it sorted this afternoon. Off work at noon, go pick up new bumper and bracket and head to my friends shop.

 

[Showtime]

True. And I do have amazing boobies.

Ahhhh, how to respond..........i don't believe you, show me....i'm a boob connoisseur!!!

Yep that would be the thingy I'm talking about. I tried to take a pic with my phone, but not working out. I'm going to get it sorted this afternoon. Off work at noon, go pick up new bumper and bracket and head to my friends shop.

Don't forget that line if it's the one i'm thinking of it uses the crank pressure to assist in the oil feed.

 

[~Rowdy~]

True. And I do have amazing boobies.

Ahhhh, how to respond..........i don't believe you, show me....i'm a boob connoisseur!!!



Don't forget that line if it's the one i'm thinking of it uses the crank pressure to assist in the oil feed.

haha my boobies don't get seen by just anyone.

Yeah I'm going to have to get it on there today. I'm so glad I noticed when I was cleaning up and putting all my stuff away. Coulda been bad news! And I don't have another 2 g's kicking around for another engine. haha

 

[Showtime]

Okay now that's it's all repaired and good to go time to get back on topic.............boobies, tell me more about them!!!!

 

[~Rowdy~]

Not much to say...fat and a nipple. What most boobies consist of. Other thatn the cylicone ones of course

 

[heavy d]

Not much to say...fat and a nipple. What most boobies consist of. Other thatn the cylicone ones of course

so are you sayin' that if azz cheecks had nipples, they would be boobies? fat and a nipple, sure be alot more fun to play with

 

[~Rowdy~]

so are you sayin' that if azz cheecks had nipples, they would be boobies? fat and a nipple, sure be alot more fun to play with

haha oh man...so many ways I could turn this. I'm gonna have to nip this in the bud, lol

 

[Bogger]

haha oh man...so many ways I could turn this. I'm gonna have to nip this in the but, lol

no pun intended?????

 

[~Rowdy~]

no pun intended?????

Pun INTENDED! haha ahh I love today.

 

[Bogger]

Pun INTENDED! haha ahh I love today.

so much better than yesterday but no way to campare to tomorow.....

friggin time/space continum...

 

[~Rowdy~]

so much better than yesterday but no way to campare to tomorow.....

friggin time/space continum...

haha. I'm still waiting on teleportation. wtf, I mean it's 2011 shouldn't we have this sh!t by now?

 

[bhowes]

It's the south...that's whats wrong, haha.



Thanks so much! Ok that's good to know! I'm going to also bring a torque wrench and re-torque on the hill.

Yep! It's a Plumbing, heating and HVAC shop. Good eye!

Thought i recognized the name do you have a brother named David and if so say hi from his hydronics instructor