Bar diameter

[AaronQ]

Hey guys what's the diameter of the factory xm bars where they clamp into the riser.
Ive got a bent set on one machine but I think someone swapped it to the sp with the taller riser. This is the spare set of bars I have but it's a different diameter then the adjustable riser I have on the shelf here. These ones measure an inch and a 1/8 Dia.

 

[250mark1]

x bars are 1-1/8" at clamps and as the picture
SP bars are 7/8" at the clamp and are straight ( no dip )

 

[AkNomad]

250mark1 is spot on, those are X bars in your pic and needs the riser for 1 1/8" bars.