Axys SKS protection options

[Culvert]

Picking up a new Axys SKS. Looking to see what everyone recommends for skid plate, front bumper protection. Just stick with the Polaris line? Extreme or Ultimate front bumper. Or what is a sturdy useful AM front bumper that will fit with Factory tarp.
Anything else I should grab right away when I pick the sled up? Belt, plugs, oil.

pics of your rides with bumpers would be great. Name of bumper & where you got it.

 

[adamg]

Are you preparing for the apocalypse? Mad Max scenario?

 

[Culvert]

No, just looking for a better front bumper then that small little piece they have now.

 

[Teth-Air]

You may want some Arm Candy braces too, $199/set.

They strengthen the weakest part of the lower arms.

Or be ready to put aftermarket arms on if you catch a rock.

I have some Skinz bumpers in stock too, windshield bags and 10.9 hard quickdrive bolts. Also roller bearings for the secondary clutch and durability shims for the primary. etc. etc. oh, and TKI belt drives.

 

[Culvert]

And do you have any bumper options Teth ???

 

[davelaw1982]

I put on polaris bumpers, i would go with skinz, if i was to do it again, if the price was comparable too. The skid plate i went polaris, and only the small one, i would probably do the bigger one, after putting the small one on, just to cover up the exposed area in front of the track.


Sent from my iPhone using Tapatalk

 

[dabensmiller]

The Polaris stuff isn't too bad quality wise in my opinion, skinz makes a solid product as well. The rear bumper on the sks isn't carbon so will be much stronger. Unless you plan on doing some towing i wouldn't change it. One thing i have always disliked about bigger skid plates is they collect ice and snow too easy.

 

[Culvert]

I looked at the skinz bumper & looks like a angled razer blade. Great for cutting down trees. I haul my sled on a deck & use factory tarp. Looking at all the bumpers I don't see how a factory tarp would fit or hold up to the sharp edges.

 

[dabensmiller]

I looked at the skinz bumper & looks like a angled razer blade. Great for cutting down trees. I haul my sled on a deck & use factory tarp. Looking at all the bumpers I don't see how a factory tarp would fit or hold up to the sharp edges.

Thats a good point and something to look at when selecting a bumper.

 

[Teth-Air]

And do you have any bumper options Teth ??

I looked at the skinz bumper & looks like a angled razer blade. Great for cutting down trees. I haul my sled on a deck & use factory tarp. Looking at all the bumpers I don't see how a factory tarp would fit or hold up to the sharp edges.

So there are 3 Skinz verisons of bumpers so don't listen completely to Culvert. There are standard Skinz, Nxt Level and Burandt. I have several styles and colours. To start with black or white as the main colour?

please PM me so I won't miss your post

Chris

 

[Culvert]

deleted.....

 

[neilsleder]

Did I miss something?


Sent from my iPhone using Tapatalk

 

[powder junkie]

I mustve missed it too. Seemed like teth was just offering help and axys tips.

Neway, skinz nxtlvl are cool bumpers. Zbroz also makes a front bumper too i believe

 

[davelaw1982]

The Polaris stuff isn't too bad quality wise in my opinion, skinz makes a solid product as well. The rear bumper on the sks isn't carbon so will be much stronger. Unless you plan on doing some towing i wouldn't change it. One thing i have always disliked about bigger skid plates is they collect ice and snow too easy.

I agree the Polaris stuff is well built, some of the skinz stuff I just like the looks of better. I agree also about tye snow and ice that a bigger plate holds


Sent from my iPhone using Tapatalk

 

[JustinMan43]

Could take a look at these guys. https://bmfabrications.com/collections/all/polaris
I bought a set of Burly Boards for my Dragon and they were awesome.

 

[AxysAssault]

Thats a good point and something to look at when selecting a bumper.

Can anyone confirm a few front bumpers that the Polaris tarp fits over, without getting destroyed?