Anyone have any first hand experience with Premier Buildings?

TylerG

Super Mod Geek
Administrator
Moderator
Joined
Nov 7, 2006
Messages
31,478
Reaction score
29,336
Location
Parkland County
We are looking at possibly purchasing one of these buildings and turning it into a cabin, I know they come unfinished on the inside but what's the build quality like? For the price to they don't seem to be a terrible deal. We are going to physically look at them on Saturday but thought maybe our snowandmud friends had some experience with them.

 
  • Thread starter
  • Admin
  • #3

TylerG

Super Mod Geek
Administrator
Moderator
Joined
Nov 7, 2006
Messages
31,478
Reaction score
29,336
Location
Parkland County
  • Thread starter
  • Admin
  • #5

TylerG

Super Mod Geek
Administrator
Moderator
Joined
Nov 7, 2006
Messages
31,478
Reaction score
29,336
Location
Parkland County
That cabin sold for $62500
that's way more than what I'm wanting, but good to know.

Basically we are wanting a small cabin with lofts, maybe a small counter with some cupboards, small "breakfast bar" but generally it's a place to sleep, year round. Will require a wood stove, and good insulation.
 

niner

Active VIP Member
Joined
Mar 14, 2009
Messages
8,674
Reaction score
62,533
Location
lacombe
These are probably some of the best built but ridiculously priced. My dads neighbor builds these. Spray foamed everywhere.
 

lilduke

Active VIP Member
Joined
Sep 15, 2009
Messages
19,685
Reaction score
70,172
Location
Local
Laubour is expensive. Might be best off to build it yourself.
 
  • Thread starter
  • Admin
  • #8

TylerG

Super Mod Geek
Administrator
Moderator
Joined
Nov 7, 2006
Messages
31,478
Reaction score
29,336
Location
Parkland County
Laubour is expensive. Might be best off to build it yourself.
that's the way it is looking for sure Dan, we're still going to go have a look and see if we get any really super inspirational ideas from the premier ones........

Doing it ourselves will also allow for proper insulation of the floor, and pest control.
 

neilsleder

Active VIP Member
Joined
Oct 18, 2009
Messages
9,618
Reaction score
17,005
Location
Leduc Alberta
We are looking at possibly purchasing one of these buildings and turning it into a cabin, I know they come unfinished on the inside but what's the build quality like? For the price to they don't seem to be a terrible deal. We are going to physically look at them on Saturday but thought maybe our snowandmud friends had some experience with them.


Those look like ones that are built in the old centre point performance building. If you’re looking for something small like that look at Seabox depot in Leduc. They build nice cabins from sea cans.
 

TylerG

Super Mod Geek
Administrator
Moderator
Joined
Nov 7, 2006
Messages
31,478
Reaction score
29,336
Location
Parkland County
Those look like ones that are built in the old centre point performance building. If you’re looking for something small like that look at Seabox depot in Leduc. They build nice cabins from sea cans.
that's the local dealer for them yep, we've basically decided we're going to go look and take some ideas from their "prefabs" to apply to our own build.
 

puddle

Active VIP Member
Joined
Dec 24, 2010
Messages
279
Reaction score
628
Location
Red Deer / Buck lake
I would ask for references from past clients and take a serious look at the builder itself. I have a neighbour who purchased one for his lake lot. He ordered it to the lock up stage. He was too excited to get the building to have a good look at the quality before he signed the check (it was late getting to him because of the lumber fiasco last spring). I spotted the windows/doors were not Alberta Building Code compliant (flashings) and offered to fix it for him -he held back money till it was fixed. When I went in to fix things, the errors were blatant and would have caused him significant money in the future. Pure ignorance on their behalf. They had no idea of codes and the issues were interior and exterior. The builder was ex Hutterite in central Alberta.

Interior issues include very poorly installed T&G pine ceiling, metal electrical boxes on exterior walls, crooked walls etc. Many more issues if one was to have a good look at it and pick it apart.

The client supplied the windows (which I educated him after the fact) and the builder installed. The builder has a responsibility of knowing all codes and general good building practises.

This is was the cabin
IMG_1702.jpeg


These are some of the exterior issues once the siding was stripped.

IMG_1945.jpeg

I installed the 3M. The slice in the house wrap was where they pushed 2 4' rolls together and installed vertically.

IMG_1948.jpeg

IMG_1952.jpeg
 

TylerG

Super Mod Geek
Administrator
Moderator
Joined
Nov 7, 2006
Messages
31,478
Reaction score
29,336
Location
Parkland County
We reached out to the Morinville Hutterite Colony and were quoted $24,000+ to build the same shell that Premier could do for $17,000.
 

summit889

Active VIP Member
Joined
Dec 10, 2006
Messages
931
Reaction score
678
Location
gibbons
We reached out to the Morinville Hutterite Colony and were quoted $24,000+ to build the same shell that Premier could do for $17,000.
This is awhile back, but did you end up buying something?
 

TylerG

Super Mod Geek
Administrator
Moderator
Joined
Nov 7, 2006
Messages
31,478
Reaction score
29,336
Location
Parkland County
This is awhile back, but did you end up buying something?
We did actually, it was Delivered end of June of 2022.

Overall, it's a simple way to get a cabin going, but be aware very few studs are actually 16" on center, here's a link to my album on the "build"

 

summit889

Active VIP Member
Joined
Dec 10, 2006
Messages
931
Reaction score
678
Location
gibbons
We did actually, it was Delivered end of June of 2022.

Overall, it's a simple way to get a cabin going, but be aware very few studs are actually 16" on center, here's a link to my album on the "build"

Thanks a bunch!
 

summit889

Active VIP Member
Joined
Dec 10, 2006
Messages
931
Reaction score
678
Location
gibbons
if you have questions I'm happy to answer them, would I do it again, I'm not sure, it saved a bunch of time in the initial construction.
I think they’re a decent start for the price unless a guy enjoys it so much he’s cool working super cheap. I’m getting the shell and will finish it over winter. I’m going with an Old Hickory building, seem to be decent on quality control. Thanks again
 

ferniesnow

I'm doo-ing it!
Joined
Dec 2, 2008
Messages
112,478
Reaction score
86,548
Location
beautiful, downtown Salmon Arm, BC
I think they’re a decent start for the price unless a guy enjoys it so much he’s cool working super cheap. I’m getting the shell and will finish it over winter. I’m going with an Old Hickory building, seem to be decent on quality control. Thanks again
Just finished the interior of an old Hickory. Did a sleeping loft and a storage loft, shower, sink, hot water tank, and a kitchen counter along part of a wall. Base board heater for heat. 16” centers were hard to find and I didn’t like the way they assemble the trusses (a chore to finish the ceiling). Windows weren’t plumb nor level. Exterior was finished in Smart panels with a metal roof. Floor isn’t insulated. Only 2x4 walls and you need metal plates for the facing of the wiring. I didn’t ask the guy how much he paid.
 

arff

Active VIP Member
Joined
Apr 21, 2009
Messages
142,534
Reaction score
56,429
Location
Leduc
We are looking at possibly purchasing one of these buildings and turning it into a cabin, I know they come unfinished on the inside but what's the build quality like? For the price to they don't seem to be a terrible deal. We are going to physically look at them on Saturday but thought maybe our snowandmud friends had some experience with them.

I looked at one by Calmar. They are a dealer. I think they would be great.
 
Top Bottom