Any ideas on putting a 163 on a 7'deck?

flabbajabba

Active VIP Member
Joined
Mar 7, 2008
Messages
749
Reaction score
301
Location
Edmonton
Well the good news is I bought a 08 XP 163. The bad news is in July I bought a truck with a clone(not name brand) 7' deck. I thought someone must have a good way to extend/support a long sled on a 7' deck. I was thinking of buying Marathons extention but I'm not sure how it supports. I would never want it to fold/break when loading and pile my sled into the back of my truck.
I was thinking of building a loop support that can be put in after the sled is on? Or will it be okay just hanging off? Also is it legal to hang off that far?
 

Trax 2 Treadz

Active VIP Member
Joined
Jan 25, 2008
Messages
1,669
Reaction score
1,075
Location
Medicine Hat
Website
trax2treadz.com
Take it over to Marathon and get Jay or Vaughn have a look at it. They'll be able to tell you right away if a Marathon extension will work or not.
 

Trax 2 Treadz

Active VIP Member
Joined
Jan 25, 2008
Messages
1,669
Reaction score
1,075
Location
Medicine Hat
Website
trax2treadz.com
The picture below will give you an idea of the kind of overhang you are looking at on a 7' deck. This is our rig, it is a 7' Standard Marathon Deck with an extension in place. If you look close you'll be able to pick out the end of the deck and the beginning of the extension. The Cat on the far side is a 153". With a 163" you'll have alot of unsupported weight back there without an extension.

DSC00539.jpg

This picture is a close up of the Cat, if you look closely you can also see the plate which can be used to u-bolt the extension to the bobtail once the extension is in place.

DSC00540.jpg

Cannot really say to much more without seeing the bob tail of your deck
 
Last edited:

Cyle

Active VIP Member
Joined
Jan 21, 2008
Messages
7,182
Reaction score
4,762
Location
edmonton
Here's a pic of my old sled, 162" on a 8' deck. It would be hanging out pretty far with only 7'. Hard on the sled for sure. You can see the line where the deck was extended, not much track would be on the deck without it.

IMG_0099.jpg
 

goodngrubby

Active VIP Member
Joined
Nov 29, 2008
Messages
3,452
Reaction score
4,829
Location
Nanaimo
I agree, there would be a crazy amount hanging off a 7' deck. I am a dealer for Cross-Trax, we build 18" extensions for all our shorty decks. We sell them for $550, and to add the mounting receivers on another brand of deck would be around 2 hours of shop time. It's actually a pretty slick setup, The sides are retractable on the extension as well, and it only takes a few seconds to mount or take off the extension. Very user friendly, and it basically turns one deck into two.
 

Attachments

  • Extension 006.jpg
    Extension 006.jpg
    59 KB · Views: 295
  • IMG_0784.jpg
    IMG_0784.jpg
    74.5 KB · Views: 281

flabbajabba

Active VIP Member
Joined
Mar 7, 2008
Messages
749
Reaction score
301
Location
Edmonton
Take it over to Marathon and get Jay or Vaughn have a look at it. They'll be able to tell you right away if a Marathon extension will work or not.

thanks for all the pics!!! I like the receiver one. I think I'll go to Marathon first my deck has a round bar on the back like theirs. So maybe my ramp will work on thier ext.
 

Lococoin

Active VIP Member
Joined
Aug 8, 2007
Messages
738
Reaction score
183
Location
Airdrie, Alberta
I have a 7 foot deck and a 162 and I ran it like that all season. The weight of a sled is up front so its not an issue. I would load it up first and if you dont like it then get an extension built.
 

flabbajabba

Active VIP Member
Joined
Mar 7, 2008
Messages
749
Reaction score
301
Location
Edmonton
Picked it up today its on the 7' kind of LOL. It is only about 6" longer then my old sled (96 summit 151") so its about 3 to 3 1/2' off . Looks funny but seems okay. I might try it a couple of times and then decide if ext is needed.
 

highmarkdude

Active member
Joined
Dec 10, 2010
Messages
30
Reaction score
0
Location
edmonton
anyone have any better pictures of a Marathon deck Extension ? preferebly from underneath

I want to build my own for and wound like to see how they attach to the deck

Thanks
 

Trax 2 Treadz

Active VIP Member
Joined
Jan 25, 2008
Messages
1,669
Reaction score
1,075
Location
Medicine Hat
Website
trax2treadz.com
They actually have to long arms per say that are bolted to the side of the deck and allow you to fold the deck extension on top of the deck when not in use.

Deck-Extension.jpg

You can also use this link to down load a extension installation pdf which may be of some use to you.
 

m1000db

Active member
Joined
Oct 23, 2009
Messages
123
Reaction score
32
Location
Vermilion ab
ive got a 153 with a 7ft deck. I dont like the over hang or all the talk about getting measured back to the tail lights... so my plan is to build a support that will go into the reciever of my truck and will have a pivit / with a lock point so that when loading the sleds it folds down to the ground then pushed under the sled after they are loaded. then when in the upright positon is lockable so will also take care of the contents in the box.? think i can build it my slef for $100 tops.
 

highmarkdude

Active member
Joined
Dec 10, 2010
Messages
30
Reaction score
0
Location
edmonton
They actually have to long arms per say that are bolted to the side of the deck and allow you to fold the deck extension on top of the deck when not in use.

View attachment 74038

You can also use this link to down load a extension installation pdf which may be of some use to you.


ya I did look at the link and it was somewhat helpful , but unofrtunatley the pictures arent that good

I just need a few good pictures of the underside where the extension meets the deck , then i can figure it out :)
 

highmarkdude

Active member
Joined
Dec 10, 2010
Messages
30
Reaction score
0
Location
edmonton
ive got a 153 with a 7ft deck. I dont like the over hang or all the talk about getting measured back to the tail lights... so my plan is to build a support that will go into the reciever of my truck and will have a pivit / with a lock point so that when loading the sleds it folds down to the ground then pushed under the sled after they are loaded. then when in the upright positon is lockable so will also take care of the contents in the box.? think i can build it my slef for $100 tops.

I thought of that idea but I,m not sure if it would work

your hitch is mounted to your frame and you deck is mounting to your box

I would think the flex in the box , especially over rought roads, would cause the hitch mounted support to push/pull on your sleds

but theres only one way to find out for sure :eek:
 

m1000db

Active member
Joined
Oct 23, 2009
Messages
123
Reaction score
32
Location
Vermilion ab
I though of that as well, but really not going to be alot of weight on it, just extra support and I will still tie the sled to the deck only.
 

Catchme

Active VIP Member
Joined
Feb 4, 2009
Messages
365
Reaction score
679
Location
Didsbury
ya I did look at the link and it was somewhat helpful , but unofrtunatley the pictures arent that good

I just need a few good pictures of the underside where the extension meets the deck , then i can figure it out :)

Here you go. Let me know if you need more.
 

Attachments

  • 100_0784.JPG
    100_0784.JPG
    50.6 KB · Views: 196
  • 100_0782.JPG
    100_0782.JPG
    42.7 KB · Views: 193
  • 100_0781.JPG
    100_0781.JPG
    41.4 KB · Views: 193
  • 100_0780.JPG
    100_0780.JPG
    40.8 KB · Views: 192
  • 100_0779.JPG
    100_0779.JPG
    43.2 KB · Views: 193
  • 100_0785.JPG
    100_0785.JPG
    51.8 KB · Views: 191
  • 100_0783.JPG
    100_0783.JPG
    48.1 KB · Views: 189
  • 100_0778.JPG
    100_0778.JPG
    55 KB · Views: 191

Catchme

Active VIP Member
Joined
Feb 4, 2009
Messages
365
Reaction score
679
Location
Didsbury
Like this? If not might have to wait until tomorrow, it's starting to get dark out.
 

Attachments

  • 100_0786.JPG
    100_0786.JPG
    38.5 KB · Views: 122
  • 100_0787.JPG
    100_0787.JPG
    43.1 KB · Views: 129
  • 100_0788.JPG
    100_0788.JPG
    49.1 KB · Views: 131
  • 100_0789.JPG
    100_0789.JPG
    34.6 KB · Views: 133
  • 100_0790.JPG
    100_0790.JPG
    26.9 KB · Views: 125
  • 100_0791.JPG
    100_0791.JPG
    31.1 KB · Views: 132
  • 100_0792.JPG
    100_0792.JPG
    36.4 KB · Views: 124
Top Bottom