Alpha Shopping List

[LMLCHEVY]

Anyone got the hood off their ‘20 CTec2 right now? Wondering what spark plug goes in these things or if they were changed with the other motor changes they did for the ‘20 MY. Cat parts website isn’t updated with all the ‘20 models yet.

Figured with how dirty this thing runs on break in I should probably get a couple spare plugs.

 

[TyDwyer51]

They are NGK BPR9ES that my dealer sold me with my '20

 

[LMLCHEVY]

Ok thanks. Pretty stock common plug then.

 

[tbud]

Has anyone put a Hyper Green skid plate on their 2020? Backordered until Dec15 but trying to see if it’s worth waiting for the green! (8639-232 is cat part #)

 

[TyDwyer51]

I have one waiting at my dealer for me . Unfortunately its not on the sled yet as mine is till in the crate. Looks like it'll be a nice match though for sure!

 

[Dawizman]

Has anyone put a Hyper Green skid plate on their 2020? Backordered until Dec15 but trying to see if it’s worth waiting for the green! (8639-232 is cat part #)

I ordered one as well for my 20. Looks good in the pic i saw on a 19.

 

[snochuk]

I ordered one as well for my 20. Looks good in the pic i saw on a 19.

Nice, you want that to protect the D&R chain case.

Had mine on at the weigh in last year but only about 3#

 

[Dawizman]

Nice, you want that to protect the D&R chain case.

Had mine on at the weigh in last year but only about 3#

Yeah, that damn case scares me

 

[Bnorth]

I ordered one as well for my 20. Looks good in the pic i saw on a 19.

you should cut it out where it meets the boards so they still clear snow in the toe holds and pre drill for the chaincase drain.

 

[tex78]

you should cut it out where it meets the boards so they still clear snow in the toe holds and pre drill for the chaincase drain.

Yup, Trent and I did that on his

 

[snochuk]

Yeah, that damn case scares me

You will be fine with a full skid.
One of those tiny case only covers might be risky.
Mine has a few scrapes but it survived.

Do what Bnorth said and cut out the skid at the front of the boards. I used a minnie saws all after skid was on so still could pop rivet the back of skI'd plate to boards.

 

[FastFarmer]

Geeezzz guys...sounds like soooooooo much work owning an Arctic Cat snowmobile. FYI, Alberta ain’t producing grease anymore so easy on them elbows fellas.

 

[Dawizman]

Geeezzz guys...sounds like soooooooo much work owning an Arctic Cat snowmobile. FYI, Alberta ain’t producing grease anymore so easy on them elbows fellas.

It's a lot of work having to break trail for all the brp riders out there, that's for sure.

 

[killerrf]

Wow.... Good job taking the time to fix this issue

Thx. Piss poor intakes. Mine was anyway. Also put some thin foam sticky pieces around the rubber where that plastic piece I modified pushes up on frame so it’s sealed on backside too. My 15 never had an issue but this 18 was terrible. Had to silicone a bead all the way around the two halves of intake.

 

[FastFarmer]

It's a lot of work having to break trail for all the brp riders out there, that's for sure. [/QUOTE

step 1: remove word #’s 5,6,7,9,10,11,12,13,14

step 2: at end of sentence add...while riding your Arctic Cat snowmobile.

 

[snochuk]

It's a lot of work having to break trail for all the brp riders out there, that's for sure. [/QUOTE

step 1: remove word #’s 5,6,7,9,10,11,12,13,14

step 2: at end of sentence add...while riding your Arctic Cat snowmobile.

Hmmmmm somebody watered down the doolaid and they are starting to sober up and move to the Cat threads.........either that or they are trolls.
Can't believe I just said that.
Hahaha

 

[Shredder]

It's a lot of work having to break trail for all the brp riders out there, that's for sure.

Lol.... and I needed the G4s to break trail for my Axys a few times.....Guess we all gotta work together to get there sometimes.

 

[tbud]

Looks Awesome!

 

[Bnorth]

need a shorter riser for mine the 5" is too tall with a 2" rise bar.

 

[LMLCHEVY]

need a shorter riser for mine the 5" is too tall with a 2" rise bar.

You got different bars then I do?