Rough ride over whoops? Don't think so. The mono rail has no impact on the whoops portion. Yes tippy through the corners, but no issues through whoops.basically terrible. rough ride over whoops and tippy in corners.
Rough ride over whoops? Don't think so. The mono rail has no impact on the whoops portion. Yes tippy through the corners, but no issues through whoops.basically terrible. rough ride over whoops and tippy in corners.
Didn't say it was due to the mono rail but they are rough on whooped out trails.Rough ride over whoops? Don't think so. The mono rail has no impact on the whoops portion. Yes tippy through the corners, but no issues through whoops.
Did you get your clutch weights set up good ..?The alpha ran awesome today very happy with it and she rips only pulled 8100rpm all day took some weight out and try again tomorrow
What do you weigh? I'm running 65psi in fronts and 150 in RTSDepends on the whoops. Real tight single track frozen whoops hit the driveline. Drop and roll is super low and hits hard at the foot area. But a bumpy trail is no problem. 45 front shocks. 65 track shock. Rear shock 135. If I want to boogie on the trial from and rear shock goes on #2
230lbs. Seat bag full off tools. Plus small gas can and storage bag. For a trail in decent shape 135 on #1 rear shock works good. Like I said if it’s bumpy And I wanna ride fast with weight on the tunnel just click at the number twoWhat do you weigh? I'm running 65psi in fronts and 150 in RTS
Thanks. I've got 40# on you.230lbs. Seat bag full off tools. Plus small gas can and storage bag. For a trail in decent shape 135 on #1 rear shock works good. Like I said if it’s bumpy And I wanna ride fast with weight on the tunnel just click at the number two
Yes took a bit more weight off it was turning 8250rpmDid you get your clutch weights set up good ..?
Popped mine on Saturday. ~2200km
Not sure yet, shop will get it when they open tomorrow. I suspect top end as the crank has a bit of movement. Everything is still contained in the motor.The motor popped? Bad like throwing a rod or just a new set of pistons
Not sure yet, shop will get it when they open tomorrow. I suspect top end as the crank has a bit of movement. Everything is still contained in the motor.
How long were 800 Etec's lasting you? Seems like lots of the Ctecs go down around 2000km.
had 4500km or so on one and 6500 or so on the other. Neither blew but cranks were out of spec. The one with 6500 had more compression than the one with 4500.How long were 800 Etec's lasting you? Seems like lots of the Ctecs go down around 2000km.
Not sure yet, shop will get it when they open tomorrow. I suspect top end as the crank has a bit of movement. Everything is still contained in the motor.
Mine has 7600 km nowHow long were 800 Etec's lasting you? Seems like lots of the Ctecs go down around 2000km.