Almost done

[99summitx]

I really think you will have to do something to get that track turning, with my 670 going to the 8 tooth drivers was enuff with the 144, but up to a 151 I geared down and I think that 600 will be working reeeaaal hard pulling hills, gotta keep the rpm and track speed up. I'm sure others will have some idea's on this.

 

[Modman]

I really think you will have to do something to get that track turning, with my 670 going to the 8 tooth drivers was enuff with the 144, but up to a 151 I geared down and I think that 600 will be working reeeaaal hard pulling hills, gotta keep the rpm and track speed up. I'm sure others will have some idea's on this.

20T top sprocket, 42 lower or 43. My drivers are 9T extros, pulls along just fine, about 70 mph on the flat trail at 7500 rpms (according to someone else's speedo since I don't have one) . Spring riding when you have more hook up and less spin you can drop to a 19T on the top. Talk to Deano670 or Summitric, I'm sure they'll have some good ideas. Summitric has a 151 on his sled as well I think.

 

[sledobsessed]

well i will try it for a while and see how it works...maybe do some clutch stuff if i can find out what to do

 

[Dr. Meatman]

i take it you got the cr throttle block then

 

[sledobsessed]

i take it you got the cr throttle block then

i sure did...looks good..your payment will be done on monday cuase my mom is away...can i use the stock throttle so i dont have yo get new thumb warmer...or do i need a differant thumb warmer?

 

[Thunderguy BOOSTED]

i sure hope the snow is coming...ill be upset if it isnt

Ya same here

No snow!!!


Justin

 

[Dr. Meatman]

to be honest with you im not sure about the skidoo throttle lever but with my throttle block i used the stock lever....no peoblems...doesnt hurt to try it bud...to be honest with ya though I got a set of klim gloves and havent turned my hand/throttle warmers on since

 

[sledobsessed]

to be honest with you im not sure about the skidoo throttle lever but with my throttle block i used the stock lever....no peoblems...doesnt hurt to try it bud...to be honest with ya though I got a set of klim gloves and havent turned my hand/throttle warmers on since

ya ill try that...maybe ill have to look a some new gloves...are the the sepeate finger or the full glove

 

[sledobsessed]

here are some more...finished off installing my new throttle block and grab bar...looks mighty fine i think...does anyone have a thumb warmer for sale?

 

[Summitric]

That's lookin' pretty sweet... I'm impressed. My 14 year old(junior highmark) polished the tunnel on my 1000rt summit today and it's lookin' good too. Congrats on the work so far. All your hard work is paying off!

 

[sledobsessed]

IT'S DONE!!!!!!!!!!!!

FINALLY...
ill gety pics up tomorrow:d:d:d

 

[Thunderguy BOOSTED]

Nice
Get pics on here a soon as u can!!!

Justin



LOL

 

[boondockin]

Joe knows his chit....and I'm a Cat guy. Few years back Joe and I were conversing a lot about clutching. He's great to talk to about tuning.

how do i get ahold of Joe??

 

[ZRrrr]

Northern Catalyst Performance Clutching Systems

He has an e-mail link.

 

[timbo]

put a dj kit in my 01 800 summit,had to change to tra3 rev clutches, rollers in primary are diff, also won't work on formula secondary 03years and down.
once i got it dialed in all i can say is wow! have setup for home and one for mountains,works great super back shifting,8100 rpm all day long.
timbo

 

[maxwell]

put a dj kit in my 01 800 summit,had to change to tra3 rev clutches, rollers in primary are diff, also won't work on formula secondary 03years and down.
once i got it dialed in all i can say is wow! have setup for home and one for mountains,works great super back shifting,8100 rpm all day long.
timbo

you dont need a tra3.. primary you do need the HPV27 secondary for sleds older than 2001 and older.

why did you have to change to a tra3?

 

[timbo]

dj kit made for revs, adjustable pin-weight on primary 2diff springs, on sec stock spring diff helix.i had to replace my primary so i bought a new one,found out later quite a bit diff between tra-tra3.