Adding Secondary Wheel kit to T3 163

pfi572

Active VIP Member
Joined
Mar 10, 2010
Messages
6,064
Reaction score
15,266
Location
Grande Prairie
d4f3921036434837d913f7e9ea203627.jpg


This is the stock location for wheels .
 

Caper11

Active VIP Member
Joined
Oct 28, 2007
Messages
9,642
Reaction score
18,939
Location
Edson,Alberta
The mounting holes are already drilled in the rails. The wheels should be staggered slightly from one rail to the other just like in pfi572's photo.


Sent from my iPad using Tapatalk
 

Big nasty

Active VIP Member
Joined
Jan 25, 2013
Messages
253
Reaction score
299
Location
Kelowna,BC
The mounting holes are already drilled in the rails. The wheels should be staggered slightly from one rail to the other just like in pfi572's photo.


Sent from my iPad using Tapatalk

exaxclty, I just added a set to my 163-t3and put one farthest forward and the other side one hole back so they are staggered like the factory ones do. Already have 300kms on them and noticed considerably less wear on my sliders already.
 

Joholio

Active VIP Member
Joined
Nov 20, 2012
Messages
35,161
Reaction score
29,699
Location
Hespero/Sicamous
Im not sure mine are staggered... I may have been staggering when they were installed? Works fine tho
 

Joholio

Active VIP Member
Joined
Nov 20, 2012
Messages
35,161
Reaction score
29,699
Location
Hespero/Sicamous
The instructions show to stagger them. There were several spots for them to go so I was unsure where to place. I'll put them in and take some pics and post them. Thanks for your help.

Sounds like you have answered your own question boss. RTFM
 

tex78

Active VIP Member
Joined
Feb 5, 2010
Messages
17,570
Reaction score
17,029
Location
DA Moose B.C
They are staggered for less noise ( everytime the wheel hit the cross bars in track)

But I unstaggered mine to mount my ice storm scratchers mounts and new noticed a difference
 

rknight111

Administrator
Administrator
Moderator
Joined
Sep 27, 2006
Messages
13,703
Reaction score
23,489
Location
Parkland County, AB and Valemount, BC
Website
www.snowandmud.com
Sounds like you have answered your own question boss. RTFM

The earlier photo appears to be a slightly different suspension that what I have on my T3. Yes it answers the question. Once I install mine today I'll take another photo and post it. It really looks like things will hit when you put them in the back where the shock and aluminum guides are. I originally went to mount them there and thought to myself, this isn't right.
 

C of Red

Active VIP Member
Joined
Oct 26, 2008
Messages
501
Reaction score
918
Location
Calgary, AB
My cousins 2013 summit x has a set of wheels before and after the shock. On my T3 I added a set ahead of the shock this fall after noticing significant wear on my sliders. I think I may add another set like the 2013. They are staggered. The left side on the '13 is in the rear most holes and the right side in the forward most holes.

image.jpg
 

Attachments

  • image.jpg
    image.jpg
    55.6 KB · Views: 186
Last edited:
Top Bottom