A Revy Sled Bum's Tale: Another Season with Lilduke

[Dooitorbust]

I was thinking that. Do you think if you cut the track it will make it weaker and more vulnerable to ripping?

I'm not sure about the durability on this track. It has been holding up pretty good so far though.

Could try loosening off track tension all the way and pulling the track to one side?

 

[lilduke]

How are you so hard on sliders I don't even have a snowflap and 1000km mine are fine. Scratchers down alllllll the time until you hit the alpine

Dan, have you mounted scratchers on your skis yet?

Not sure? I do have just about 3000km's on and no I am not running scratchers...haha

Keep wrecking those things.

 

[lilduke]

Could try loosening off track tension all the way and pulling the track to one side?

Yeah i bet that would work! great Idea

 

[Vance Matheson]

Dan if you cut the ports a little bigger and tap the slider out you can put your sled in reverse it will peel the slider off for you.

Sent from my SGH-I747M using Tapatalk

 

[lilduke]

Dan if you cut the ports a little bigger and tap the slider out you can put your sled in reverse it will peel the slider off for you.

Sent from my SGH-I747M using Tapatalk

Can I put them back in that way too?? Haha

 

[MADMAN]

Could try loosening off track tension all the way and pulling the track to one side?

Like a pair of panties

 

[Vance Matheson]

Lol dan

Sent from my SGH-I747M using Tapatalk

 

[woody_tobius_jr]

I've tried to change my sliders through the track port before, but didn't have much luck. Once I got the bolts out, I still couldn't get them to slide off, and I was using a hammer and screwdriver to try and tap them off. Has anybody had success doing this, and if so, how did you get them out?


Sent from my iPad

 

[pfi572]

Get them back far enough to clamp vise grips on them. (Back end)
Slide hammer on grips work the best but two strong arms works also. Lol

 

[Vance Matheson]

if they have been on there awhile i spray wd-40 along the rail and leave it over night and it makes them a little easier to come off and on. the reverse method saves a lot of time, get it out about 4 to 6 inch and bam there off....the easy way.

https://www.youtube.com/watch?v=7b25Ub7fHTY

 

[MK4TDI]

if they have been on there awhile i spray wd-40 along the rail and leave it over night and it makes them a little easier to come off and on. the reverse method saves a lot of time, get it out about 4 to 6 inch and bam there off....the easy way.

https://www.youtube.com/watch?v=7b25Ub7fHTY

Well, ill be fawked. I might have to try that just for chitts and giggles.

 

[MADMAN]

WD40, come along and a slide hammer works well also, or drill a hole for a karabiner and use a come along or quad and pull

 

[lilduke]

Had kind of low expectations for taday, it was socked right in and raining..... So we headed down the road to my favorite zone.

Rode 30kms of the most brutal friggen trail you can imagine, in the rain......

Top 5 best pow days and top 5 best days of sledding of my entire life!! I can't even begin to explain how good it was, so I'm not even going to try..,...

PS: VERY Slidey,, Set off lots of little ones today in the trees.... 60mph winds up top.

 

[pfi572]

What's with the upside down belt ? Lol
Right on for the sledding.

 

[lilduke]

What's with the upside down belt ? Lol
Right on for the sledding.

Haha belt was blown, got too hot.

 

[pfi572]

Oh great !!!!
Sliders and now a Doo blowing belts?
What's team leader going to say about this ? Lol
**** never wears out sitting in a garage.
Glad your getting some good snow Dan and you are getting to enjoy it.

 

[oler1234]

Heard Rogers pass is going to get 30-40cm tonight...

 

[maxwell]

3000k of hard mountain riding nothing wrong with that!

 

[kovs]

Looks like the 30km of brutal trail was worth it. !!!



Sent from my iPhone using Tapatalk

 

[lilduke]

Looks like the 30km of brutal trail was worth it. !!!



Sent from my iPhone using Tapatalk

Damn Straight!!