3" track with belt drive

[old700]

I got a 16 162 2.6 with a Kurts Gear down (No tensioner, just larger diameter pulleys and more tooth contact than stock) and am pondering switching to a 3" track for next season. Has anybody had any troubles running a 3" with the quickdrive?
Thanks

 

[007sevens]

I got a 16 162 2.6 with a Kurts Gear down (No tensioner, just larger diameter pulleys and more tooth contact than stock) and am pondering switching to a 3" track for next season. Has anybody had any troubles running a 3" with the quickdrive?
Thanks

I went through three belts on a Slober turbo kit. It didn't take much to remove the cogs and this was a 2.4". On my Hm turbo I went with C3 and once I found the right tension I had no problems running a 3" track

no experience with Kurts stuff, Sorry

 

[06 Dragon]

Same, no problems with my C3 belt drive on my pro running a 3" 174 with Boost-It turbo set up.

 

[rightsideup]

I have a tki on a 174 x 3 2017 poo with a bd side kick no issues yet

 

[Dazzler]

I got a 16 162 2.6 with a Kurts Gear down (No tensioner, just larger diameter pulleys and more tooth contact than stock) and am pondering switching to a 3" track for next season. Has anybody had any troubles running a 3" with the quickdrive?
Thanks

I have around 1000 k on my 15 Pro so far, running stock Polaris quick drive, BD turbo @ 10lbs, 15x162x3" track and no issues yet..
About 1200 k on the 13 Pro, Kurts gear down, BD turbo @ 6 lbs, 15 x 163 x 2.4 track.. Bounced the bottom drive sprocket off a stump last Christmas and cracked it so the factory quick drive is back on for now.

 

[ktmsx350f]

1500 miles with boost and no issues with belt drive on the Axys. I used to change belts on stock pro rmk's all tje time Axys seems to be alot better on belts IMO

 

[tstams]

I have a tki on a 174 x 3 2017 poo with a bd side kick no issues yet

sorry how do you like this setup looking to build this exact sled this season what boost are you running 6lbs kit or 10 lbs

 

[Teth-Air]

We have TKI belt drive kits in stock if you need one.

 

[old700]

All a guy has to do is switch to the Avid 3" pitch 7 tooth drivers correct? Would be using a Camso track.

 

[007sevens]

All a guy has to do is switch to the Avid 3" pitch 7 tooth drivers correct? Would be using a Camso track.

Correct.

 

[Teth-Air]

All a guy has to do is switch to the Avid 3" pitch 7 tooth drivers correct? Would be using a Camso track.

FYI Powder Freaks makes drivers in BC. They have nice product but I don't know much more. Just say'n in case you need drivers and don't want to import from USA. Otherwise there are a few vendors on here that have the Avid product.

 

[moto5151]

Please PM me with a price for a belt drive.

 

[Chrisco]

I have Avid drivers in stock if anyone needs.

 

[kakwa climber]

I have a c3 belt drive that was on a 13 pro $500. 780 518 0014