3" Track On M-Series

[Fatdaddy]

To install the new 3" track do you have to change to 7 tooth drivers or is there enough clearance with the front heat exchanger? What all is involved besides cutting the 16'' track width to fit in the M Series Tunnel?

 

[BDF#900]

here's link to a thread showin pics....

https://www.snowandmud.com/forum/456/2009-m1000-sno-pro-174-project-18800-3.html

 

[slomo]

there is suppost to be a 1/4" clearance at the front cooler with a 3" paddle track,no drivers needed

 

[0neoldfart]

A 2.5" Camo Extreme is a tight fit with the stock drivers ( I've one on the M1k and on wifey's M8), so I imagine the 3" isn't gonna fit properly without a driver change.

 

[ned]

Cannot put smaller drivers on. Inside of track will not clear the diamond drive case

 

[BDF#900]

Cannot put smaller drivers on. Inside of track will not clear the diamond drive case

Talked to Brian at Canadian Powersports, he's runnin 7 tooth drivers. They are listed on Avid's website.

 

[BDF#900]

there is suppost to be a 1/4" clearance at the front cooler with a 3" paddle track,no drivers needed

this is the clearance in the front by the cooler. There's about 1/4" of room. This is the 3"x 174". Catman and i are running the same tracks.stock 8 tooth driver.

7 tooth won't work with mechanical reverse.