3" Track Install

[RMKassault]

I have decided to go with a the 3" on my 2014 RMK Assault. I have new ice age rails, the required 8" rear wheel, Avid Drivers, and anti stab kit. Does anyone have any tips on the install or extra mods that would need to be done to make all this work the best?

Any advice is greatly appreciated!

 

[powder junkie]

I have decided to go with a the 3" on my 2014 RMK Assault. I have new ice age rails, the required 8" rear wheel, Avid Drivers, and anti stab kit. Does anyone have any tips on the install or extra mods that would need to be done to make all this work the best?

Any advice is greatly appreciated!

Turbo

 

[RMKassault]

Have that already

Sent from my SM-G925W8 using Tapatalk

 

[ABMax24]

Some people prefer the drop and roll kits to give more clearance in the front of the tunnel, but I'm sure the turbo will more than over come the losses.

 

[moto5151]

These pros tend to get a little warm when running 3" tracks. Boost-it make a great tunnel cooler.

 

[ABMax24]

^^^^ Also true, run lots of scratchers, or a better cooler.

 

[robbie9859901]

You'll have to modify your chain case. The track will rub on it other wise.

 

[rcardle20]

What if your running belt drive, will it rub?

You'll have to modify your chain case. The track will rub on it other wise.

 

[Chrisco]

What if your running belt drive, will it rub?

No it will not.

 

[RMKassault]

Re: 3" Track Install

I'll have to take a look and see about the chain case mod.

I also just talked to boost it and their cooler won't work because I already have a water to air intercooler system for my turbo.

Sent from my SM-G925W8 using Tapatalk

 

[moto5151]

Re: 3" Track Install

Depends what cooler. I have a water to air cooler with the charge air cooler under tunnel. Also have a cooler in front in belly pan for the track. Also made by boost-it.

 

[RMKassault]

Do you have a boondocker turbo?

Sent from my SM-G925W8 using Tapatalk

 

[moto5151]

No I run the boost-it turbo.

 

[Jorgy]

No it will not.

Chris, on a 15 155 with belt drive can I run 8 tooth avids with a 3.0" and have enough clearance? No drop and roll required?

 

[2Quickrides]

Chris, on a 15 155 with belt drive can I run 8 tooth avids with a 3.0" and have enough clearance? No drop and roll required?

Nope. Need to run the 7 tooth.