28's on rzrs?

eoo

Active member
Joined
Jul 11, 2009
Messages
48
Reaction score
22
Location
Christopher Lake, Sask
Hello, just bought a 2010 rzr-s and thinking of putting 28" mud zillas on it. Has any done this. And would there be any problems with rubbing or anything else.
 

DaveB

Active VIP Member
Joined
Sep 18, 2007
Messages
5,946
Reaction score
17,063
Location
Red Deer area
Hopefully one of your fellow RZR guys chimes in....but my neighbor/riding buddy (RZR101 on here) has a RZR and I know that with 27's and aftermarket wheels, the tires will hit the motor mount on one side and the airbox on the other. He has since installed a Racer Tech 2" lift and cut and modified the motormount.
 
Last edited:

papajake

Active VIP Member
Joined
Dec 5, 2006
Messages
2,930
Reaction score
5,859
Location
Didsbury, Alberta
they have one all done up at mountain toys in cochrane mean looking phone they might email you a picture
 

eoo

Active member
Joined
Jul 11, 2009
Messages
48
Reaction score
22
Location
Christopher Lake, Sask
Hopefully one of your fellow RZR guys chimes in....but my neighbor/riding buddy (RZR101 on here) has a RZR and I know that with 27's and aftermarket wheels, the tires will hit the motor mount on one side and the airbox on the other. He has since installed a Racer Tech 2" lift and cut and modified the motormount.

Thanks for the info.
 

RZR101

Active VIP Member
Joined
Jun 15, 2009
Messages
653
Reaction score
878
Location
Penhold
I put 27" on a standard rzr, had a few minor rubbing issues. You should be ok on the S with the wider stance and extra ride height. Check out rzr forums.net, I'm sure someone on there has this set up.
 

dallasdaku

Member
Joined
Jan 13, 2008
Messages
11
Reaction score
0
Location
Strathmore, AB
buddy has 30 inch silverbacks, 3 inch lifr rims clutch kit and we extended snorkels above the roof. had to heat up floorboards and push them back because front tires rubbed a littkle. never seen anything like it. itsa swamp buggy.
 
Top Bottom