snoflake
Active VIP Member
4 screws plus the airbox.
'23 Summit belt storage
- Thread starter vodoo103
- Start date
Kibbels
Active VIP Member
The trunk thingee works fine…
The hood is super easy to take off - you could put in nose cone if you wish.
But I found out with old style XM Jerry can you can’t put the NEW linq bag (the one sitting on seat) as it’s too tight.. unfortunately
The hood is super easy to take off - you could put in nose cone if you wish.
But I found out with old style XM Jerry can you can’t put the NEW linq bag (the one sitting on seat) as it’s too tight.. unfortunately
Attachments
Dawizman
Active VIP Member
I moved the the rear linq bracket back a hole to fit my BCA bag with the fuel can.
Wonder if that would work for you?
sledneck__11
Active VIP Member
165 or 154?
Dawizman
Active VIP Member
165 short tunnel
- Admin
- #46
would the heat off the pipe negatively impact the durability of the belt though?
Dawizman
Active VIP Member
Would the ambient heat from the insulated pipe be worse than the heat generated by the belt running on the clutches?
- Admin
- #48
better heat distribution over the whole belt on the clutches? I don't know was just a thought, lots of people seem to really bunch their belts up too when they store them.
Kibbels
Active VIP Member
I don’t want to drill holes… I’m weird that way lol
FranktheTank
Active VIP Member
If it’s weird not to want to punch holes through my 25k sled than I am most definitely weird
Sent from my iPhone using Tapatalk
crazy_cappa
Active member
It's a lil tight for sure, but they fit on my g4. Is the g5 different? Is that the combo your talking about?
jcjc1
Active VIP Member
zip tie the belt flat, fold it and then zip tie it again. very small footprint and easily fits in any tunnel bag.
Sessionsdoo
Active VIP Member
wkotelko
Member
For guys with the big screen….
I too thought there was lack of accessible storage on the gen 5. Belt, tow rope and tool storage etc needs to be quickly accessible in my opinion so the factory rear seat box was not an option. Didn’t have to modify anything really, removed the battery foam and aluminum bracket, turned battery sideways and used some heavy duty Velcro underneath it to hold it in place. Re routed the cables and put a piece of weather strip along the top to keep it tight and boom I have a decent storage compartment. This seat box has a rubber liner to keep snow out from underneath as well. Ski doo tool kit will pop in nicely in front of the belt.
little disappointed BRP could not come up with something that would bolt on and accept the battery right out of the box. No, I do not want to tie up my linq bag with this stuff which is for food, refreshments and extra layers, goggles gloves etc etc.
I too thought there was lack of accessible storage on the gen 5. Belt, tow rope and tool storage etc needs to be quickly accessible in my opinion so the factory rear seat box was not an option. Didn’t have to modify anything really, removed the battery foam and aluminum bracket, turned battery sideways and used some heavy duty Velcro underneath it to hold it in place. Re routed the cables and put a piece of weather strip along the top to keep it tight and boom I have a decent storage compartment. This seat box has a rubber liner to keep snow out from underneath as well. Ski doo tool kit will pop in nicely in front of the belt.
little disappointed BRP could not come up with something that would bolt on and accept the battery right out of the box. No, I do not want to tie up my linq bag with this stuff which is for food, refreshments and extra layers, goggles gloves etc etc.
Attachments
- Admin
- #55
Thanks, one of projects for the sled for the summer.
Caper11
Active VIP Member
I’m just waiting for the new trunk to be released for the big screen sleds.
Sent from my iPhone using Tapatalk
Sent from my iPhone using Tapatalk
06yamahaapex
Active VIP Member
brp is releasing a new seat box for 24 to fit the battery and a bit of storage.
wkotelko
Member
Yes I have seen this new box. from what I’ve read on the sno west forum it fits the battery and allows the belt but then no spot for the tool kit. PN 860202668
Last edited:
NoBrakes!
Active VIP Member
Looks a bit “rounder”? But doesn’t look any bigger than the current?
shop.ski-doo.com
LinQ Deep Snow Seat Box
Shop LinQ Deep Snow Seat Box - (sku: 860202668) at Ski-Doo® CA Official Store. Free Shipping available.
shop.ski-doo.com
Caper11
Active VIP Member
Looks a bit “rounder”? But doesn’t look any bigger than the current?
LinQ Deep Snow Seat Box
Shop LinQ Deep Snow Seat Box - (sku: 860202668) at Ski-Doo® CA Official Store. Free Shipping available.
It’s deeper than the current one.
Sent from my iPhone using Tapatalk
Similar threads
