2012 cat engine technology

macronut

Active VIP Member
Joined
Feb 14, 2007
Messages
1,720
Reaction score
589
Location
AB

Kruchy

Active member
Joined
Nov 16, 2009
Messages
119
Reaction score
37
Location
Lloydminster
Saw that. Really hope they come out with some new engine Tech. Even DI would be good.
 

suzuki_ryder

Active VIP Member
Joined
Oct 19, 2009
Messages
974
Reaction score
899
Location
Gibbons,AB
Hmmm..That air pump idea sounds ridiculous. I could see plenty of tuning issues with aftermarket products like how to get more air and fuel in, what about when the air pump fails? And they will. Dumbest idea I've heard yet.
 
Last edited:

macronut

Active VIP Member
Joined
Feb 14, 2007
Messages
1,720
Reaction score
589
Location
AB
Hmmm..That air pump idea sounds ridiculous. I could see plenty of tuning issues with aftermarket products like how to get more air and fuel in, what about when the air pump fails? And they will. Dumbest idea I've heard yet.

Everything fails sooner or later, it would matter how often it failed!...Also how it affects the output power is gonna be interesting....
 

drew562

Active VIP Member
Joined
Mar 13, 2008
Messages
5,386
Reaction score
21,074
Location
edmonton
When has cat ever been hard to mod or tune. The best two stroke for bolt on power has always been cat. I'm sure they are sticking to there commitment to hp and modability
 

suzuki_ryder

Active VIP Member
Joined
Oct 19, 2009
Messages
974
Reaction score
899
Location
Gibbons,AB
When has cat ever been hard to mod or tune. The best two stroke for bolt on power has always been cat. I'm sure they are sticking to there commitment to hp and modability

I don't think they're any easier to mod than a doo, or Polaris. Or gain anymore power than either brand with the same bolt on's

But back to that article, I hope they do bring direct injection, they would be up to current technology motor wise, and should obviously be up to technology with the new chassis. We'll know soon enough if it's a good change.

What I'm hoping to see is a better steering system rather than the steering post coming vertical from the chassis and to get rid of fox floats for suspension. I don't care what anyone says, they suck. The coil overs work far better.
 

catmando

Super Moderator
Moderator
Joined
Nov 7, 2006
Messages
9,041
Reaction score
6,761
Location
Edmonton
I don't think they're any easier to mod than a doo, or Polaris. Or gain anymore power than either brand with the same bolt on's

But back to that article, I hope they do bring direct injection, they would be up to current technology motor wise, and should obviously be up to technology with the new chassis. We'll know soon enough if it's a good change.

What I'm hoping to see is a better steering system rather than the steering post coming vertical from the chassis and to get rid of fox floats for suspension. I don't care what anyone says, they suck. The coil overs work far better.

Yes Fox Floats do suck...............
 

Rucky

Active VIP Member
Joined
Feb 14, 2007
Messages
2,060
Reaction score
70
Location
Fort Saskatchewan, AB
I don't think they're any easier to mod than a doo, or Polaris. Or gain anymore power than either brand with the same bolt on's

But back to that article, I hope they do bring direct injection, they would be up to current technology motor wise, and should obviously be up to technology with the new chassis. We'll know soon enough if it's a good change.

What I'm hoping to see is a better steering system rather than the steering post coming vertical from the chassis and to get rid of fox floats for suspension. I don't care what anyone says, they suck. The coil overs work far better.

WTF?!?! This is what makes kitties easier to maneuver than other sleds. The Ski-doo riser angle pulls you over the opposite way you want to be when you try to sidehill, making it more difficult. That is the main thing holding me back from picking up an Etec.
 

suzuki_ryder

Active VIP Member
Joined
Oct 19, 2009
Messages
974
Reaction score
899
Location
Gibbons,AB
WTF?!?! This is what makes kitties easier to maneuver than other sleds. The Ski-doo riser angle pulls you over the opposite way you want to be when you try to sidehill, making it more difficult. That is the main thing holding me back from picking up an Etec.

Lol and the funny thing is, is that's the only thing I hate about my cat. Maybe it's just me though. I can always upgrade the suspension. It's a lot harder to change steering geometry. Those are my only 2 things I don't like. But I'll put up with those for their rock solid motor.
 

scrfce

Active VIP Member
Joined
Oct 18, 2008
Messages
1,947
Reaction score
1,413
Location
spruce grove
WTF?!?! This is what makes kitties easier to maneuver than other sleds. The Ski-doo riser angle pulls you over the opposite way you want to be when you try to sidehill, making it more difficult. That is the main thing holding me back from picking up an Etec.

C3 powersports makes an aftermarket bracket that straightens the steering post on the xp.
 

maxwell

Active VIP Member
Joined
Apr 25, 2007
Messages
20,072
Reaction score
43,148
Location
Sherwood Park, Alberta, Canada
WTF?!?! This is what makes kitties easier to maneuver than other sleds. The Ski-doo riser angle pulls you over the opposite way you want to be when you try to sidehill, making it more difficult. That is the main thing holding me back from picking up an Etec.

have you been on a new etec? there is no effort.


anyways

that sounds different :eek:

save me 1500$ a year in 2 stroke oil
 
Last edited:

m6 rider

Active member
Joined
Apr 27, 2010
Messages
25
Reaction score
6
Location
edmonton
Eut i really hope is they change the spindles from the 09-11 sleds once u put on simmons flex skis they turn soo.. hard
 

munhoez

Active VIP Member
Joined
Jan 27, 2009
Messages
4,395
Reaction score
592
Location
In a Dakota R/T, down by the South Sask. River
Lol and the funny thing is, is that's the only thing I hate about my cat. Maybe it's just me though. I can always upgrade the suspension. It's a lot harder to change steering geometry. Those are my only 2 things I don't like. But I'll put up with those for their rock solid motor.

U mean Suzuki's rock solid motor.
 

catalac

Active VIP Member
Joined
Nov 22, 2008
Messages
3,416
Reaction score
12,990
Location
Red Deer
Guess we only have to wait a couple days but dealer told me today 1100cc 4 stroke T 197hp.
 

Kruchy

Active member
Joined
Nov 16, 2009
Messages
119
Reaction score
37
Location
Lloydminster
Guess we only have to wait a couple days but dealer told me today 1100cc 4 stroke T 197hp.
Did he say anything about weight or maybe direct inj. for the 800? Is the official release 8:00 a.m. eastern on the 8th?
 

Rucky

Active VIP Member
Joined
Feb 14, 2007
Messages
2,060
Reaction score
70
Location
Fort Saskatchewan, AB
have you been on a new etec? there is no effort.


anyways

that sounds different :eek:

save me 1500$ a year in 2 stroke oil

Yeah I have and I still can't work with them with that stupid angle between post and riser. Why would I want it to pull me over the sled while counter steering?
 
Top Bottom