2010 m8 sno pro mods

woodym7

Active member
Joined
Aug 22, 2010
Messages
142
Reaction score
0
Location
Prince George
1. So primary clutch springs what do you recommend for 3-6000

2. Vents...my m7 i just did side vents do i need more and if so where

3. I want to run a can for sure just dont want to have to run a controller

4. And any other advice is appreciated
 

neddacsac

Active VIP Member
Joined
Oct 14, 2007
Messages
398
Reaction score
214
Location
High River,AB
I put a MBRP can on. Sounds great and no fuel controler requierd.
This year I wanted better clutching so my shop recomended a Blue/pink primary spring, adjustable weights and a more agressive helix. I cant remember the cut on the helix off the top of my head. Set up is for 4-9000ft.
Also look in to having the shocks re valved for a better ride.:beer:
 
Joined
Jan 15, 2009
Messages
8
Reaction score
0
Location
Calgary AB / West Kootenays B.C.
Few other options to toss around for the M8 Snow Pro

showThumb_inc.gif


WRP Sno Pro Gauge Lifter, this vents out heat as well tilts up the gauges when standing. AMP also makes a gauge lifter in Billet Alu or Blk and looks good.

The Super~Q Can (SPG or Skinz Protective Gear) exhaust silencer This can has a nice sweet tone. RK-Tek has great reviews on this can.

GillVentCat.jpg


Side Panel Vents, so many options out there with screens & colors, Gill Vents look good on the Cat, and there tough!
 

mur190

Active VIP Member
Joined
Dec 17, 2008
Messages
988
Reaction score
1,226
Location
bonnyville AB
did the chris burandt shock valving in my HCR over the summer heard nothing but great things about this..
 

jaredszakacs

Active VIP Member
Joined
Mar 19, 2009
Messages
2,328
Reaction score
1,603
Location
pincher creek ab
I gotta say go with either the mbrp can or a THING can from sledshed in revy thanks for the info on that gauge lifter i was looking for one
 
Top Bottom