2010 600 etec, hard starting??

[180 nytro]

So when I make the first start for the day no matter how long the sled sits (days, months) it starts first pull with no problems! But when the sled is up th operating temp and u let it sit for 5 mins it takes almost 15 pulls to get it going! This is insane! The sled runs awesome otherwise, idles perfect and lots of power! Any ideas??

 

[maxwell]

someone else had a similar issue on here. i cant remember but i think he just installed new plugs......maybe.

 

[Marley]

I have a 600 HO SDI and when cold it takes about 10-15 seconds pushing on the electric starter to get it going - when warm it's a one second push. Opposite of your problem...

 

[Dmf]

I have a 600 HO SDI and when cold it takes about 10-15 seconds pushing on the electric starter to get it going - when warm it's a one second push. Opposite of your problem...[/QUOT

your comparing apples to oranges

 

[Marley]

I have a 600 HO SDI and when cold it takes about 10-15 seconds pushing on the electric starter to get it going - when warm it's a one second push. Opposite of your problem...[/QUOTyour comparing apples to oranges

That's why I said "opposite".

 

[clayton800]

Had the same problem with my 2011 800 etec last year
put in a new fuel pump under warranty and it fixed
the problem

 

[chevy]

Try given it alittle bit of throtel when tryen to start it.

 

[maxwell]

Try given it alittle bit of throtel when tryen to start it.

you cant do that on an etec. 5% throttle and it will not start at all. hence why ice chunks need to be cleared from the throttle