2008 Dodge 6.7 Cummins Engine Brake Whine

barleyfarmer

Active VIP Member
Joined
Jan 16, 2010
Messages
612
Reaction score
1,112
Location
Vega
My truck started to whine when I turn on the engine brake!It never used to!I changed the exhaust gas filter on top of the engine (200$) because it had the perform service message come up on the screen!I have 130 000km on the truck.Is there a broken line or do I have to remove the valve assembly and clean it?
 

Diamondledinc

Active VIP Member
Joined
Nov 17, 2012
Messages
429
Reaction score
277
Location
Calgary
My truck started to whine when I turn on the engine brake!It never used to!I changed the exhaust gas filter on top of the engine (200$) because it had the perform service message come up on the screen!I have 130 000km on the truck.Is there a broken line or do I have to remove the valve assembly and clean it?

If its whining like a turbo whine. thats normal. Its creating extra back pressure and spinning the turbo very quickly as the vane position changes, hence slowing the vehicle down.
 

barleyfarmer

Active VIP Member
Joined
Jan 16, 2010
Messages
612
Reaction score
1,112
Location
Vega
No not turbo noise.It squeals even at idle when I hit button to turn on brake.Then squeals when slowing down and brake engages.It never used to make noise so I am starting to think I have a leak somewhere.Also I see some guys remove the valve and put in a delete kit.
 

arff

Active VIP Member
Joined
Apr 21, 2009
Messages
142,615
Reaction score
56,471
Location
Leduc
Talk to Ric. He did the delete on my truck. Best thing I ever did. Improved my mileage and power on my 6.7.

Sherwood Park Service.

464 6000
 
Last edited:

Absledder

Active VIP Member
Joined
Oct 29, 2013
Messages
760
Reaction score
683
Location
bonnyville
Probably an exhaust leak somewhere. Same thing happened on my father in laws 07 when he had it. Not sure where his leak actually was but if it gets worse with the brake it's probably upstream of the turbo.

Sent from my SM-G925W8 using Tapatalk
 

nosaj82

Active member
Joined
Nov 26, 2010
Messages
50
Reaction score
33
Location
alberta
There is a Cummins form online with loads of info. You might be able to find some good info that will point you in the right direction


Sent from my iPhone using Tapatalk
 

PJ440x

Active member
Joined
Dec 13, 2009
Messages
115
Reaction score
92
Location
Beaumont, AB
My truck started to whine when I turn on the engine brake!It never used to!I changed the exhaust gas filter on top of the engine (200$) because it had the perform service message come up on the screen!I have 130 000km on the truck.Is there a broken line or do I have to remove the valve assembly and clean it?

I know what's wrong. It's the liner in the hose connected to Hydro boost system. Let me know if this link works for you. It happened to me a few months back. An easy fix.

https://m.youtube.com/watch?v=rsV78-X2jWM
 

LBZ

Active VIP Member
Joined
Apr 16, 2010
Messages
3,068
Reaction score
3,651
Location
Central Alberta
Exhaust leak from the exhaust manifold. Probably number 5 or 6 hole. Buddy's '08 did it for months till he finally went looking for it. New gasket fixed it.
 

ABMax24

Active VIP Member
Joined
Sep 10, 2013
Messages
4,912
Reaction score
14,245
Location
Grande Prairie, Alberta, Canada
Check the gaskets on the EGR cooler, had 3 work trucks that have each had them replaced twice. It makes the turbo squeal really loud with the exhaust brake active, and it would even do it under hard acceleration with the turbo at full boost.
 

northof40

Active member
Joined
Dec 5, 2014
Messages
56
Reaction score
61
Location
Saskatchewan
Exhaust leak from the exhaust manifold. Probably number 5 or 6 hole. Buddy's '08 did it for months till he finally went looking for it. New gasket fixed it.

Likely this^^. Either cracked manifold or gasket leaking, Many that were left with emissions systems intact were prone to cracking or gaskets blowing on the earlier models. They see some very high temps during a regen.
 
Top Bottom