2002 800 Edge Blowing Belts

BrosBeforeHos

Active VIP Member
Joined
Dec 4, 2008
Messages
216
Reaction score
176
Location
Athabasca
A have a friend with a 800 that has a Polaris primary clutch and Team Tied secondary and he's having a really hard time keeping belts on it. He's shimmed his secondary but continues to have trouble. Anyone have this problem with this setup. Looking for some insight. Thanks.
 

retiredpop

Active VIP Member
Joined
Mar 18, 2007
Messages
1,727
Reaction score
5,208
Location
Calgary
Has he made sure the alignment is right and the clutches are running true with each other. If he has shimmed his secondary I take it that means the offset is good?
 

darkday

Active member
Joined
Dec 25, 2007
Messages
44
Reaction score
12
Location
grande prairie
I would check the motor mounts, grab the primary and try to lift it up. Any movement usually means ripped motor mounts. MY gen 2 800 was hard on motor mounts until i put a slp torque arm in front of the motor.
 

BILTIT

Active VIP Member
Joined
Dec 20, 2010
Messages
10,073
Reaction score
20,649
Location
Lloydminster
How often is he losing belts? I run a TIED and i have been through a couple but they are old belts too. I have gotten ~400 miles a belt so far. I have all the torque arms and good mounts, offset was set using team tool.

Every time i blow one its usually at top speed wot, it takes out my speedo cable aswell.
 

duck

Active VIP Member
Joined
Dec 3, 2006
Messages
8,670
Reaction score
12,864
Location
Cardiff Echoes, Morinville
Website
www.myspace.com
A have a friend with a 800 that has a Polaris primary clutch and Team Tied secondary and he's having a really hard time keeping belts on it. He's shimmed his secondary but continues to have trouble. Anyone have this problem with this setup. Looking for some insight. Thanks.


stock gearing? Maybe drop a tooth or 2 on top....should get the heat down
 

BrosBeforeHos

Active VIP Member
Joined
Dec 4, 2008
Messages
216
Reaction score
176
Location
Athabasca
Thanks guys, he's talked with SLP and got some direction. I also told him to become a member so I don't have to these questions lol
 

E-Zmoke

Active VIP Member
Joined
Oct 12, 2008
Messages
1,515
Reaction score
2,751
Location
BC
What is it hitting for RPM? It's more then likely over revving. Is it eating belts in elevation? How hot are the clutches getting? What weights are in it and what springs?
 

Assaulter13

Active member
Joined
Nov 27, 2012
Messages
85
Reaction score
96
Location
FSJ, BC
"I have a friend" -- right.

So just tell us what the problem that you are having -- the "friend" has been done.

I "have a friend that has pustules on his gonads" He is just a friend and he has a girlfriend..........
 

BrosBeforeHos

Active VIP Member
Joined
Dec 4, 2008
Messages
216
Reaction score
176
Location
Athabasca
"I have a friend" -- right.

So just tell us what the problem that you are having -- the "friend" has been done.

I "have a friend that has pustules on his gonads" He is just a friend and he has a girlfriend..........

Soooo, what your saying is you have pustules on your gonads and you have a girlfriend...she probably would like you to get that looked at. Thanks for the input anyways though.
 

500efisks

Active VIP Member
Joined
Sep 2, 2008
Messages
181
Reaction score
112
Location
Lumsden, Saskatchewan
Engine mounts broken will do it for sure. I have 2002 rmk 800 and blew belts at WOT until I changed out broken motor mounts. No more issues. I use slp torque limiters also but this does not fix broken engine mounts.:eek:
 
Top Bottom