174" HM Pump Gas Turbo with Vi-Pec Standalone

[mmagic]

Polaris 2013 Pro RMK with HM Pump Gas Turbo kit on the snow and running well installed at Mountain Magic. The 240 HP race gas kits soon to hit the snow as fast as we can complete them. The sled pictured will be a 174" with CR boards.

 

[Boostmonkey]

Nice looking install but i have a few questions:

If a guy did have to change his Quick Drive belt how hard is it to remove the cooler and what not that’s in the way?
Any special tools need?
Would you lose a bunch of fluid from the cooler? (Assuming it is a water to air system)
Dose the exhaust exit both the bottom (Stock hole) and the side panel?
If so why?


Thanks Boostmonkey

 

[mmagic]

Nice looking install but i have a few questions:

If a guy did have to change his Quick Drive belt how hard is it to remove the cooler and what not that’s in the way?
Any special tools need?
Would you lose a bunch of fluid from the cooler? (Assuming it is a water to air system)
Dose the exhaust exit both the bottom (Stock hole) and the side panel?
If so why?


Thanks Boostmonkey

We find the dual exhaust will not plug off in any conditions. The intercooler slides out of the way to change the belt easily with no special tools and no need to remove antifeeze.

Bruce

 

[dezmitchell]

another nice one from the boys @ MM good job! cant wait to see it when its done.

 

[mmagic]

We have now run the HM standalone pump gas kit in the mountains. The kit ran at 7lbs of boost in Sicamous 1200ft to 7200ft elevation and ran great. The sled did not have any hiccups at all. The 240 kits will be on the snow by the end of the week. I personally will be riding one myself. Any questions please do not hesitate to call Mountain Magic at (780) 474-9400.

Bruce

 

[GYMBRAT]

VERY nice work!

 

[JP.]

How has the vipec standalone been working? Are their any adjustments you can make on the hill if conditions like air pressure changes?? Or does that have to be done by laptop?
Thanks

 

[Chrisco]

How has the vipec standalone been working? Are their any adjustments you can make on the hill if conditions like air pressure changes?? Or does that have to be done by laptop?
Thanks

All adjustments are done with a laptop.

 

[JP.]

I see.. I don't understand why a guy would chance a system like the vipec when you can't make adjustments on the hill.
We all know weather changes up at elevation quite often, so if that is going to affect the performance of your sled and you can't do anything about it is it worth it?
I can make small changes at any time on the hill whenever I want with my XIC BoostIt to get the best results all day.

Who knows, I guess time will tell if these vipec systems will work.

 

[lilduke]

I see.. I don't understand why a guy would chance a system like the vipec when you can't make adjustments on the hill.
We all know weather changes up at elevation quite often, so if that is going to affect the performance of your sled and you can't do anything about it is it worth it?
I can make small changes at any time on the hill whenever I want with my XIC BoostIt to get the best results all day.

Who knows, I guess time will tell if these vipec systems will work.

If the Vipec is setup correctly you shouldnt EVER have to mess with it,, It compensates for changes in Barametric pressure, Correct? Its like driving a turbo car... just pin it and hold on..lol

 

[JP.]

If the Vipec is setup correctly you shouldnt EVER have to mess with it,, It compensates for changes in Barametric pressure, Correct? Its like driving a turbo car... just pin it and hold on..lol

Ya I'm not sure how vipec works.... But you can't compare a turbo car to a turbo mountain sled.

 

[lilduke]

Ya I'm not sure how vipec works.... But you can't compare a turbo car to a turbo mountain sled.

Yeah dont do alot of deep powder with the subaru,, But if a sleds ECU worked as good as the cars id be buying that setup...

 

[mmagic]

I see.. I don't understand why a guy would chance a system like the vipec when you can't make adjustments on the hill.
We all know weather changes up at elevation quite often, so if that is going to affect the performance of your sled and you can't do anything about it is it worth it?
I can make small changes at any time on the hill whenever I want with my XIC BoostIt to get the best results all day.

Who knows, I guess time will tell if these vipec systems will work.

The Vipec is true standalone. It automatically adjusts for all changing conditions to maximize engine performance at all times. There is nothing to touch or any need to on the hill. The only programming is done at our shop. As I stated the sled was run from 1200ft to 7200ft in changing conditions and ran very well.

Bruce

 

[JP.]

The Vipec is true standalone. It automatically adjusts for all changing conditions to maximize engine performance at all times. There is nothing to touch or any need to on the hill. The only programming is done at our shop. As I stated the sled was run from 1200ft to 7200ft in changing conditions and ran very well.

Bruce

Oh ok... That sounds good. Can't wait to see them working.
Thanks

 

[800dragon_rmk]

450+ miles on my hm 240 kit with the vipec, i ride from 2000-6500 feet and i havent had a single problem or tuning issue yet. Too many people running stuff down that they have never seen or tried in person!! the joys of the internet i guess. Ill put my hm up against any other 800 turbo.

 

[HRT Offroad]

I rode with an HM kit w/Vipec for a couple days in Sicamous a couple weeks ago. It was spot on in the upper RPM range, but definitely had a burble off the start. If you grabbed a handful of throttle from a dead stop it would actually stall the motor??

 

[JP.]

I rode with an HM kit w/Vipec for a couple days in Sicamous a couple weeks ago. It was spot on in the upper RPM range, but definitely had a burble off the start. If you grabbed a handful of throttle from a dead stop it would actually stall the motor??

Well all he has to do is drive back down and hook up to laptop and change his map... Then go back up and hope it works better. Sounds pretty good.

 

[E-Zmoke]

Well all he has to do is drive back down and hook up to laptop and change his map... Then go back up and hope it works better. Sounds pretty good.

Ahahaa phuk JP you crack me up LOL

 

[mach123]

what are these kits going for, $$$$

 

[E-Zmoke]

The Vipec is true standalone. It automatically adjusts for all changing conditions to maximize engine performance at all times. There is nothing to touch or any need to on the hill. The only programming is done at our shop. As I stated the sled was run from 1200ft to 7200ft in changing conditions and ran very well.

Bruce

So who's map are you guys running in this Viper unit? Is it HM's map or your own? Have you modified the map in any way to get it to run up here? How does the Vipec work exactly when a ridge of low/high pressure moves in? How much will it compensate and is it an overall compensation like a main fuel compensation or will it give it more/less fuel in every RPM increment when
needed? Can you turn the boost up and down?