06 750 brute force with a epi clutch kit?

[tex78]

ok so i put in a almond prim spring and a red secondary spring.... now the 4wd - 2wd light flicker when 4wd switch is on.... and it seems to have 4wd in 2wd... [ front tires turn when in mud and or catwalkin in 2wd ] ???
any one ever seen this?

 

[tex78]

oh and it also doesn't have the ebc noise when i shut off the key now....

 

[rider4life]

Double check the two wiring connections that you would have undone when you removed the clutch cover, make sure there clean, and properly connected, I'd recommend putting some dielectric grease in them as well.

 

[jgonie]

the accuator on the belt cover make sure it is clean mine was starting to crap out and not make sounds i took it apart cleaned it up cleaned all the connections good as new,

 

[tex78]

so i figured her out.... i had also cleaned the mud ect.. from under the seat...
did the ebc acuator test and found 8 volts to it.... found the fan wires rotten off the c/b and 3 out of the 4 wires under the main fuse box rotten off too... fixed the wires and shes good to go....