Search results

I have a 2016 doo and bought the 2021 expert t. The bars aren't the same, also the riser isn't the same block, the expert has smaller hand grips as the bar gets smaller at the hands. And I also hear the turbo steering post is different because they needed to make room for turbo. I think the...

On my 2021 doo 165T dealer told me 2 year is what u get and u can't get more from doo. But I could get 2 more years with aftermarket company. 1670 1 year and 2200 or something for 2. I am wondering if I should buy it or not. I usually keep my sled, but don't trust aftermarket company

I run interceptor on my m1000 and not dominator. I can't remember where I heard this, probley a friend but I do believe that dominator does not have a rust inhibitor in the oil so stuff can rust(bearings stuff that is steel)? where as interceptor does. I did some research into this for you(and...

I wouldn't think it would be about climbing and stuff, more forking around and stuff. looks like fun.

Lol, I had a CR 500 and I used to stud up and ride in the winter, it would have enough power for sure, but I don't have it anymore. sold it :-(

Looks like fun. Almost wanna buy one :-) need a 4 stroke tho I think, as my KTM 300 2 stroke would work too hard all the time.

"To put it into perspective, most stock sleds have roughly the same power to weight as a Nascar stock car. Turbo'd sleds have a power to weight ratio closer to an IHRA/NHRA Pro Stock drag car. You don't see any professional drivers guzzling a Pilsner during a pit stop" I'd watch that on tv...

Cough cough Torpy sucks there is no snow there. lots of stumps, and ruff trail

I'd like to see if the RF noise from the Go Pro causes any problems once the beacon has been able to pick up the signal from the transmitting beacon.

I don't think its as bad as the video shows. Pretty much all electronic devices put out RF noise. maybe the go pro doesn't have very good shielding to prevent most of its RF from leaving its case. The Beacon is searching for its signal and can not find any so any RF hitting it is gonna confuse...

Stop stealing our snow lol

Which one makes the sled look more flickable is the winner.

Well I have a few paddles ripped of the track and it does suck for traction. I am thinking that if it digs a hole in the powder that might not be a huge deal as its better then just spinning with no go forward juice lol I wonder if spinning the track backwards will make the paddles rip off...

Yeah maybe later on in the year for a track. Trenching eh humm Sent from my HTC_Amaze_4G using Tapatalk 2

I heard about reversing the stock 162 2 1/4 track around to get better performance due to the stock paddles being so soft and folding over. Is there any truth to this? Or would it it just rip the lugs off? I tried my friends cat 900 with a powerclaw track and it pulled alot better then mine. I...

One thought would be to put a cam in but put a aftermark cam in maybe with higher lift? more power up top. ?

I just wanted to pipe in, I have an 08 m1 and I did not like the front end, or the way it handled the bumps and steering was tougher then it should be. I cranked up the front spring on the front of the rear suspension all the way and I also drilled a hole in the tunnel 1 inch down from the stock...

Thats not my sled hoist. Thats My friends shop, he built it.

I figured I'd post some pictures of the sled. I don't have any other pics of it handy right now.

Well I took the sled out again Sunday around the house burned alittle over half a tank, I didn't check the plugs again but it ran great no bogs, seems that my bottom end/midrange is not as fat anymore feels alot more crisp. Did a few wide open pulls for 10 seconds each. I need to bring a wrench...