The handle bar kit replaces the top plate. When you order the kit it comes all pre assembled. Just bolt it on and go. The rear shocks are just extensions that go on the top of the shock. I think I didn't have the front fork extensions on in this pic. If I remember correctly they fit like sh**...
My son was 7 last summer and the little 50 was having problems keeping up on the trail and making it up some hills. Before jumping him up to a bigger bike I decided to stick some money into his 50. My daughter will ride it this summer. I installed a attack handle bar kit, 60cc big bore kit...
I just read in instagram that they are shutting down. They couldn’t obtain the BRP dealership for sicamous. Too bad. I haven’t had the chance to get there since they opened but they looked like they had a good thing going there.
Costco sells one that is in a toolbox. Probably work good if your not permanently mounting it to the deck. You could just rig it back to the front tie offs. You probably could even run it off a small battery so that you are not running cables to front of truck. Might end up being cheaper than...
I picked up a ferrite kit to stop this happening on my 17 G4. Problem is the kit is for the XM sleds and the plugs are different. Does anyone know how they have been retrofitting them to the G4's? Is there a different ferrite kit?
I'm running a stock 17 F350 with level kit and 35's. Couple buddies with same truck have gone with the ez-link. Their mileage hasn't improved enough to sway me to delete yet. I'm seeing 15-17L/100km in the city and as low as 12-14L/100km on the highway empty. I'm sure there is a different tune...
I was surprised how fast the fuel went rotten in the Honda. I'll be running Aspen fuel in it for now on. Not sure what type of ski came on the holeshot kit, maybe a C&A? The kit I bought came with a gripper ski with steel side runners bolted to either side of the ski. The ski seems to be ok but...
How old is the fuel in it? I just put a ripper kit on the boys Honda 110 this year. Bike sat from October to mid January. The bike was acting similar to yours was. I drained the fuel out and ran some fresh 91 and a half can of sea foam in it. its running like a champ now. I think these bikes are...
They’ve updated a plastic wire housing that sits on top of the head. It comes with the new updated harness. The way they have the harness routed there is so many places where it can rub a wire out. I found a second bad wire behind the thermostat housing.
Aside from your low compression and that you have a turbo. Your symptoms sound similar to mine, I'm stock other than can. I had a main engine harness go bad last year, the secondary injector wires were rubbing and caused a short. I had that harness replaced and the second harness is now done...
Has anyone used the older chev 2500/3500 16" aluminum rims on their trailer with 7000lb axles? I'd like to get some aluminum rims for the trailer and these can usually be had pretty cheap.
Yes you have to cut the stock plastic. It’s only 8 bucks or so to replace it so don’t stress about it. I installed one last year and really like it. It elevates it enough so that it’s not constantly covered in snow.