Search results

Here is the condition report from last Thursday. Am heading down tomorrow to try out the sled now that I have it back together after changing the waterpump seal.

Catman10 , what is the "latest strategy flash"?

Ron, I did mine a month or so ago and it was no problem, the one on the frame rail was a little difficult to get at but with the socket and an extension it was doable, from what I was hearing on other sites I was beginning to think it could not be done anywhere outside the dealership. I also...

Thanks for the step by step but yes I already have it fixed and the motor back in, what a pain is a$$ for a $35.00 part, replaced everything while I had it apart. I have yet had a chance to ride it but maybe this weekend if the snow sticks around.

Thanks for all the replies, to save further problems down the road he replaced them all with the 225 - 60r -16's he made a deal with his brother on the 225 - 55r - 16's as his Sonoma is need of a couple of tires, won't be the same make but will be the same size.

Changing the water pump seal and need to remove the impellar shaft to do the oil seal as well. I have removed the 2 bolts from the bottom of the water pump that sem to hold the shaft in place but cannot pull it out. Did I miss a step or is it just hard to removed account of the the 2 seals??

Presently have the motor out of my 07 M1000 to replace the water pump seal. Before I put it back in I was thinking of adjusting the oil pump rod by two turns, presently using approx 1.5 litres of oil to every tank of fuel. Any thoughts or should I just try one turn for now? Presently have Y pipe...

It is a 92 Monte Carlo and it is for an Insurance inspection to get plates as it is over 12 years old. The garage here wants to install 2 new tires as the front are a different make and size to what is on the back. The front are new and one back motomaster is brand new as it looks like they...

Trying to get a car safety inspection done for my son. What is the ruling for tires, car presently has 225 55r 16 Good Year on the front and 225 60r 16 motomaster on the rear, do they need to be all the same size and make?

Sons 07 M8 flashed a code the other day when it was started after riding it for awhile, 4 flashes then 2 the table states a short or open circuit in the water temp sensor any thoughts as to what or where he should be looking?

I just measured mine and with a 153 on the deck it was 46" from the truck tail lite to the rear grab bar, a little close so may want to invest in the bicycle light???

Engine light PO499 code Dodge Ram 2500??? Anyone have any idea what this code means?? PO499 EVAP Emission vent Vlv/Sol Malfunction High , it is on a 2003 Dodge 2500 Hemi

I went 4" with no problem, have to take the brake line out of the clamp though

I noticed that with mine, did not like the idea so now carry it in back pack??

I have a 2 place you can borrow if you are still looking? Rob

This water pump seal thing is got me thinking, I am going to remove the skid plate tomorrow, apparently there is a bleed hole around the water pump casting and if there is any sign of antifreeze in the area the seal is to be changed as it will leak internally.

I have a chance to try a Diablosport Predator or a Bullydog programmer on my 08 6.4 anyone have thoughts on which one would be the better of the the 2 or has anyone used either of them? Rob

Question for all or any mechanic's out there. My 07 M1000 started burning antifreeze (you could smell it when you first start it and when I took the head off you could see the top of the piston was washed), so I installed new O rings put it back together and it was still burning it when first...

Here is one of me and my two sons in Sicamus last year, Quest cabin if I remember correctly??

Echo Cycle in Edmonton had a bunch of Monster gear at the sled show..