Zbroz Front end kits for Pro RMK

[JDmotorhead]

Looking to install a Zbroz front end kit on my 2013 Pro, just looking for feed back from anyone who is running a Zbroz set up! Thanks

 

[mx2hunter]

I run zbroz on my sba with pro spindles and grippers. You need to gring the spindles to clear the arms but they are really well put together and with the 39 my sled rolls on its side easy peasy. It balances perfect! Alt impact makes some too I like the high clearance feature though.

Sent from my SM-G900W8 using Tapatalk

 

[Polar_RMK]

Where are you guys order it from.
Zbrozracing doesn't answear, any dealers in Calgary?

 

[DaltonW]

I had the 36" kit on my 15 and loved it. pulled it off to sell the sled, the kit has maybe 300km on it. was on a 15, PM me if interested. can swap spindles as well so ya don't have to trim yours.

 

[Polar_RMK]

Sorry I am looking for a dealer cuse I need a bunch of different stuff for both Rmk and XM

 

[Boost-it]

We are a ZBroz dealer and keep quite a bit of stock for polaris and ski-doo. Two hours north of Calgary.

 

[Stockorwalk]

I had the 36" kit on my 15 and loved it. pulled it off to sell the sled, the kit has maybe 300km on it. was on a 15, PM me if interested. can swap spindles as well so ya don't have to trim yours.

You still looking to sell your 36" kit?

 

[Heimie]

I run zbroz on my sba with pro spindles and grippers. You need to gring the spindles to clear the arms but they are really well put together and with the 39 my sled rolls on its side easy peasy. It balances perfect! Alt impact makes some too I like the high clearance feature though.

Sent from my SM-G900W8 using Tapatalk

When you did this, what did you do about shocks? My '13 RMK Assault has 18.5" shocks and I'm told I need to run Pro length of about 16.6". Don't really wanna drop another $1000 on shocks, and just shortening the rods on my stockers is not the right way to do it. Maybe shorten them a 1/2" or so, but not 2".