Anybody know where I can find a set of relocation brackets? Are there any vendors on here that sell them? I've found a couple places online that sell them but they're either out of stock for another month or aren't responding to emails. Thanks!
XP Scissor Relocation Bracket
- Thread starter jaredvh
- Start date
bhowes
Active VIP Member
try chris from teth air hes on the site quite a bit
www.sourceinnovations.ca
www.sourceinnovations.ca
Last edited:
Dooitorbust
Active VIP Member
I bought mine from TSS (250) 833-7501
tex78
Active VIP Member
Dooitorbust
Active VIP Member
I was unaware Bandit was out of B.C. Good to know.
tex78
Active VIP Member
He has a camp job so sometimes he has a buddy send stuff out for him.
He does this on the side and has stock built up when off.
Pays for his sleding addiction lol
sent from A UNKNOWN PLACE IN TEA LAND
He does this on the side and has stock built up when off.
Pays for his sleding addiction lol
sent from A UNKNOWN PLACE IN TEA LAND
Bnorth
Active VIP Member
Yup Bandit is a beauty and usually has stock. I think he can only ship on days off but it's worth the wait to deal with a standup guy.
- Thread starter
- #8
I talked to bandit. His mill is having some issues and he just went back to work for 3 weeks. So if all goes well he should have some brackets ready in about a month. Is anybody running the suspension drop brackets with their scissor relocate?
- Thread starter
- #9
Just ordered a set from these guys!
bhowes
Active VIP Member
Let us now how it worked out for you
Winter Brew
Active VIP Member
Wow, lots of guys making those now...the Micku's/TSS came up with them a out 4 years ago. Rooster Built is the US distributor for them and has them in stock for the US guys. They work great on the 2010+ xp skid geometry.
tex78
Active VIP Member
Yep I have them on my 10.
Now that I put in the t motion ill see if it works with it also.
I know I went from spring 3 before to spring 1 with t motion and relocates.
As far as the same amount of sag goes.
Hope its even better.
sent while I should be drinking twisted teas
Now that I put in the t motion ill see if it works with it also.
I know I went from spring 3 before to spring 1 with t motion and relocates.
As far as the same amount of sag goes.
Hope its even better.
sent while I should be drinking twisted teas
banditpowdercoat
Active VIP Member
Just got back from Camp, Saw this thread. I start making them tonight hopefully, or tomorrow morn. Got the typical domestic duties to do from no one being at home for 3 weeks first, IE grocery shopping so I can eat, freakin Laundry etc etc. Man I need a wife!
And ya Winterbrew, Micku's came up with them. I only heard about them and the relocating idea, never seen them before. Couldn't find them anywhere when I wanted to try them, so I designed a few different distance ones and tested them. Tried lots, from 3/4" to 1 7/8" Found the 1 1/4" seemed to be the best balanced results. Brackets are Billet 6061 T6, machined to a nice fit tang into the slide rails for maximum strength.
And ya Winterbrew, Micku's came up with them. I only heard about them and the relocating idea, never seen them before. Couldn't find them anywhere when I wanted to try them, so I designed a few different distance ones and tested them. Tried lots, from 3/4" to 1 7/8" Found the 1 1/4" seemed to be the best balanced results. Brackets are Billet 6061 T6, machined to a nice fit tang into the slide rails for maximum strength.
Last edited:
tex78
Active VIP Member
About time u came on here. Been friggin putting Ur name up for a while now.
I think mike sure likes s and m.
sent while I should be drinking twisted teas
banditpowdercoat
Active VIP Member
LOL, Ya Havent even been on DT much, and just today got slammed by a certain MOD there. So I just might be here a lil more often HAHAHA Added to my tapatalk too, so I just got notification of your reply LOL. Man I love technology!
banditpowdercoat
Active VIP Member
I have relocates back in stock!!!
Drops will be a few more days. Hope powdercoat them later today or tomorrow, then final milling
Drops will be a few more days. Hope powdercoat them later today or tomorrow, then final milling
marchuk
Active member
can you use the relocation brackets on ice age rails?
Winter Brew
Active VIP Member
The ice age rails I have seen are solid material behind the scissor mount so you just drill new holes where you want them. Some may even have holes already located in more than one mounting location. No need for brackets in this case.
Similar threads
