XMR Help?

Tippmannr

Active member
Joined
May 9, 2011
Messages
27
Reaction score
0
Location
Canada
Hey guys. I am looking at a new XMR. So i was wondering; do the Silverbacks ride as badly and dig as deep as everyone says? Also, since it is a 2-up, will it water wheelie? Or will i need a clutch kit?
Thanks guys.
 

KawisakiRider

Active VIP Member
Joined
Feb 23, 2009
Messages
390
Reaction score
492
Location
Beaumont
The silver backs aren't that bad, (they r a mud tire tho), if you ride lots of hard pack you might not like them but then I would suggest not buying that machine. I think to get that beast to wheelie would require some heavy mods. Its a sweet bike for sure, just buy it and mod it, lol.:beer:
 

Carrots

Active VIP Member
Joined
Nov 23, 2009
Messages
4,265
Reaction score
2,079
Location
spruce grove, alberta
They water wheelie like nothing! In fact it's hard to keep the front end down in deep water. They are also not a bad ride either. A lot smoother then I thought it would be


Sent from a iPhone
 

Attachments

  • ImageUploadedByTapatalk1335656643.787744.jpg
    ImageUploadedByTapatalk1335656643.787744.jpg
    87.3 KB · Views: 197
  • ImageUploadedByTapatalk1335656656.230268.jpg
    ImageUploadedByTapatalk1335656656.230268.jpg
    82.1 KB · Views: 216

Tippmannr

Active member
Joined
May 9, 2011
Messages
27
Reaction score
0
Location
Canada
Ok, sweet thanks.
And what if i just got a regular Outlander 800 and thru some 'laws and a snorkel on it? Outlanders dont need a lift or anything to clear 29.5's do they?
Thanks.
 

Carrots

Active VIP Member
Joined
Nov 23, 2009
Messages
4,265
Reaction score
2,079
Location
spruce grove, alberta
Ok, sweet thanks.
And what if i just got a regular Outlander 800 and thru some 'laws and a snorkel on it? Outlanders dont need a lift or anything to clear 29.5's do they?
Thanks.

If you do that then I don't think you get the air control suspension and the on board air compressor, and the rad relocate. Your better off to just get the xmr and then it's all factory and no messing around with ordering parts and installing.


Sent from a iPhone
 

BIG DAWG

Active VIP Member
Joined
May 3, 2010
Messages
479
Reaction score
370
Location
Delburne Ab
Ok, sweet thanks.
And what if i just got a regular Outlander 800 and thru some 'laws and a snorkel on it? Outlanders dont need a lift or anything to clear 29.5's do they?
Thanks.

thats what i did last yr and love it 800 xt with xmr snorkle and rad relocate +++ 28 laws but should be good with the 29.5
 

kbrunlees

Active VIP Member
Joined
Sep 24, 2010
Messages
1,704
Reaction score
1,364
Location
Edmonton
you will have to space the tires out to clear the wheel wells, The XMR is already got the big wheel kit in it I believe. Or you could take run of the mill 800 and build it up and nosuspects what you have until it is too late.
 

eoo

Active member
Joined
Jul 11, 2009
Messages
48
Reaction score
22
Location
Christopher Lake, Sask
had pines in prince albert build me a 800xt. rad relocate, fan over ride switch, snorkled, 1" shock spacers, fuse block relocated, clutch kit, 29.5 outlaws, itp 212 rims and hand thumb warmers. this has the power 015.jpg steering. 018.jpg 013.jpg
 

Carrots

Active VIP Member
Joined
Nov 23, 2009
Messages
4,265
Reaction score
2,079
Location
spruce grove, alberta

Tippmannr

Active member
Joined
May 9, 2011
Messages
27
Reaction score
0
Location
Canada
Ya went out ti Pines and got a quote...18 grand haha.
A little much for me haha.
 

Tippmannr

Active member
Joined
May 9, 2011
Messages
27
Reaction score
0
Location
Canada
Ok, i found a sick Outy for 12000. It has a 3" lift though. I was on one of Ostacruiser's videos and he says that nobody runs a lift over 2"...why not?
Thanks.
 

kovs

Active VIP Member
Joined
Apr 12, 2009
Messages
841
Reaction score
1,158
Location
Rosetown, sask
that 2009 does not have a 3" lift like advertised, i just looked at ad, i would bet it has a pipe lift, maybe a HL bracket lift on front for the 31's
 

Tippmannr

Active member
Joined
May 9, 2011
Messages
27
Reaction score
0
Location
Canada
Ok, thanks.
Would i be able to take it all off and run stock if i bought some 29.5's?
And did she look OK to you?
Thanks.
 
Last edited:

..Stiffler..

Active member
Joined
Feb 2, 2007
Messages
102
Reaction score
75
Location
Grande Cache, AB
Here is my old 2010 outty xt800 with mods. I ran 30" silverbacks with no lift. But springs were all the way up. And I loved the silverbacks

Miss this quad :(

ImageUploadedByTapatalk1335767590.233258.jpg

Stiff
 

i ford i

Active member
Joined
Mar 6, 2012
Messages
64
Reaction score
38
Location
Leduc AB
I bought the xmr; the tires are great; maybe its people that are bashing them that are afraid of change, majority of people run laws. Not saying i'm against it but there are alternatives, and the silverbacks in my opinion are a nice set of tires.
 

storm1972

Active VIP Member
Joined
Aug 15, 2010
Messages
14,054
Reaction score
5,595
Location
Liard
I bought the xmr; the tires are great; maybe its people that are bashing them that are afraid of change, majority of people run laws. Not saying i'm against it but there are alternatives, and the silverbacks in my opinion are a nice set of tires.
they are a decent tire, just hard on axles if your trigger happy , only flaw i find to them is their weight
 
Top Bottom