Xm piston replace

[revbyu]

well I made a bit of a stirup at one of the dealers in alberta and told them that I wanted to see BRPs specs and wanted it on the work order that 5 thou was there limited - needless to stay no long after - engine was done under warranty

 

[CUSO]

Back to the main topic...

Is there an aftermarket recommended piston, or should I just run stockers? I am nearing 5000km also and it's time.

 

[sledn]

Back to the main topic...

Is there an aftermarket recommended piston, or should I just run stockers? I am nearing 5000km also and it's time.

Wossner Pistons---Tom at Mots Machining Edmonton

 

[CUSO]

Thanks Steve. I think you are right after some reading. I will get him to bring some to the sled show.

Wossner Pistons---Tom at Mots Machining Edmonton

 

[slededjr]

Wossner are great. Allow proper warm up and ��

 

[Giver800]

I also put wossners in my 13 xm last year. Only put on about 300km last year but they were great no issues or complaints. I also had the dealer reset break in as extra precaution as well.

 

[tex78]

I've used the mcb 2 rings on 800r ptec and works better than the stockers, no heat fade at all