Xm mounting scratchers

rmkcrazy

New member
Joined
Dec 8, 2011
Messages
2
Reaction score
0
Location
regina
Where's the Best location on mounting scratchers to the rails on the xm? Pics to would be awesome..
 

tex78

Active VIP Member
Joined
Feb 5, 2010
Messages
17,570
Reaction score
17,029
Location
DA Moose B.C
Not sure if u can see where in my pics

There's a empty hole up front... Use that to put spring in and drill for the bolt mount

Then I moved the rear idler wheel forward and mounted the mounts fir the ice storms I got
 

Attachments

  • uploadfromtaptalk1415549880276.jpg
    uploadfromtaptalk1415549880276.jpg
    146.9 KB · Views: 434
  • uploadfromtaptalk1415549958433.jpg
    uploadfromtaptalk1415549958433.jpg
    132.9 KB · Views: 429
  • uploadfromtaptalk1415549989419.jpg
    uploadfromtaptalk1415549989419.jpg
    101 KB · Views: 437

RaspberryNytro

Active VIP Member
Joined
Jan 20, 2008
Messages
707
Reaction score
309
Location
Airdrie & Oman, in Middle East
Not sure if you guys have ever seen the bolts in the back end of the skis....
I will post pics when I can.
I have always ran a 3/8 bolt with head of bolt out the bottom of the ski about an inch, with a cpl other nuts spread out on the threads of bolt, to space it out the thickness of the ski.
Drill the hole right near the back of ski on the inside corner and put the bolt up through the bottom and then the top nut or "wing-nut" :)
on the top to secure it. Never have to worry about forward / reverse issues all day, until time to load. (DON'T FORGET TO TAKE BOLT OUT PRIOR TO LOADING ) !!!!! :)
Randy at Motor Tech in Golden used to even make them and sell them to us all the time. He would take a 3/8" piece of bar and tig weld a carbide tip on the bottom end of it. I have never ran any other scratchers in 15 years and never replaced a set of sliders due to over heating !!!
 

Attachments

  • IMG_0324 2.jpg
    IMG_0324 2.jpg
    236.9 KB · Views: 236
  • IMG_0325 2.jpg
    IMG_0325 2.jpg
    208.8 KB · Views: 228
Last edited:
Top Bottom