XIC controller help

[RyanAME]

I’m running an XIC controller on a 14 xm 163 but had a screen failure so I sent my box into SDS for repair. He replaced the screen but I’m not sure he gave me the same box back. I have only adjusted the main fuel to 130 and the boost % up and down a bit but concerned about all the other setting and don’t want to run it until I get some numbers from some of you guys. He gave me a print off of what was currently setup and for starters the main fuel is way low at 70. Please help

 

[mountainsledmania]

I’m running an XIC controller on a 14 xm 163 but had a screen failure so I sent my box into SDS for repair. He replaced the screen but I’m not sure he gave me the same box back. I have only adjusted the main fuel to 130 and the boost % up and down a bit but concerned about all the other setting and don’t want to run it until I get some numbers from some of you guys. He gave me a print off of what was currently setup and for starters the main fuel is way low at 70. Please help

I have the latest settings for both inter cooled and non inter cooled set up's. Send me a PM and well figure out a way to get it to you.

 

[RyanAME]

I sent you a PM

 

[menace1]

Hi Ryan can you send me the latest settings too please

 

[maxwell]

me too!

 

[Sledkrew61]

And me to

 

[Northof60]

Hi ryan, any chance I could get the settings as well?