Winter storage (shrink wrap)

C of Red

Active VIP Member
Joined
Oct 26, 2008
Messages
501
Reaction score
918
Location
Calgary, AB
First time boat owner this summer and getting everything winter ready. I originally planned on storing the boat in my garage but the one we decided to buy will not fit. I looked into heated storage but holy $$$$$. Now I'm leaning towards shrink wrap and leaving it in the driveway. Just looking for opinions on the wrap. If its crap I'll try to find indoor unheated storage. Thanks in advance for your input.
 
Last edited:

LUCKY 7

Active VIP Member
Joined
Jan 17, 2009
Messages
7,138
Reaction score
10,809
Location
Sparwood
I also bought a new to us boat this year. Talked to some guys and yes the shrink wrap is a great option! I will be storing mine in my garage or in a dome style crappy tire garage tent.
 

tex78

Active VIP Member
Joined
Feb 5, 2010
Messages
17,557
Reaction score
16,989
Location
DA Moose B.C
Find a inside not heated storage



Problem with the wrap is ur boat side and trailer and trailer tires are out in the elements all winter, get super sun beaten
 

polaris011

Active VIP Member
Joined
Nov 18, 2010
Messages
666
Reaction score
692
Location
olds ab
Had a buddy get his boat shrink wrapped in airdrie last year and ended up with black mold over the entire interior had redo all his upholstery
 

C of Red

Active VIP Member
Joined
Oct 26, 2008
Messages
501
Reaction score
918
Location
Calgary, AB
My google machine isn't helping to much, anyone have a recommendation for indoor non-heated storage in the Chestermere / Calgary area?
 

sc800

Active VIP Member
Joined
Nov 3, 2008
Messages
1,405
Reaction score
1,947
Location
Living life at the Lake!
Had a buddy get his boat shrink wrapped in airdrie last year and ended up with black mold over the entire interior had redo all his upholstery
I have heard of this happening also. One has to be really sure the inside is completely dried out or this will happen. I'm fortunate to be able to store mine in my heated garage.
 

tex78

Active VIP Member
Joined
Feb 5, 2010
Messages
17,557
Reaction score
16,989
Location
DA Moose B.C
Also a few open baking soda boxes take the moisture out of the inside, even when in cold storage
 

doorfx

Active VIP Member
Joined
Jan 10, 2011
Messages
10,050
Reaction score
24,523
Location
calgary ab
ImageUploadedByTapatalk1442162119.654999.jpg
 

woody_tobius_jr

Active VIP Member
Joined
Nov 9, 2009
Messages
1,349
Reaction score
1,430
Location
Morinville, AB
I use the desiccant containers in my boat as well, 1 in each storage compartment by the motor, 1 by the drivers seat and 1 up in the walkway in the bow. My boat is in an unheated garage. Boat is great in the spring no mood or mildew and the containers are about 1/2-3/4 full by the time I pull it out for its spring cleaning. I was looking at the shrink wrap as well a few years ago, but I was worried about the humidity that would build up in there. Warm day, cold night, etc creates moisture and I didn't think that the shrink wrap would let any air circulate.


Sent from my iPad using Tapatalk
 

Trashy

Super Moderator
Moderator
Joined
Nov 16, 2008
Messages
132,643
Reaction score
104,969
Location
Fort Macleod
I have non heated, non covered outside storage, in the SE ;)

There is a place, on the East side of the 2, North of Airdrie, He is offering to shrink wrap boats for the winter.

I don't have a boat, so I haven't looked at it further than what I can read from the highway.

Hope that helps some
 

Joholio

Active VIP Member
Joined
Nov 20, 2012
Messages
35,161
Reaction score
29,699
Location
Hespero/Sicamous
You can have vents intalled in the shrink wrap as well as using the damp-rid. I was quoted 12.50$/ft so 250 for my 20' tub plus damp rid plus vents. Also he recommended to wait to shrink wrap until cooler daytime temps and get it off early in the spring before it warms up in the day too much. Holio
 

Bogger

Bogger of the GBCA
Joined
Feb 21, 2007
Messages
24,426
Reaction score
18,506
Location
Down by the Bay
I had my 24' cabin cruiser shrink wrapped and left it outside uncovered. Had no issues what so ever, they installed 6 vents and I should have removed the snow but I didn't and there were a few stress tears by spring from freeze/thaw but no mold/mildew/water.

My only complaint is that they didn't run the adhesive low enough and it left marks above the water line that were very difficult to remove.

I will gladly do it again but I will be sure to instruct them to keep the adhesive below the water line.
 
Top Bottom