Which would you choose

[pinkpantherusmincus]

I have just bought a 2012 m800 162 snowpro... I have a bit of cash left over and want to either upgrade the track to a 2.6lug ($900) or go to the 38'' a arms from a 2014 ($500). if you were given the choice which one would you choose. I mainly ride in whistler and its deep.

 

[slomo]

I'd go with the track over the arms

 

[mountianguy]

The track is a huge improvement you should be able to find a used one this fall for 500 ish

 

[sc800]

Track for sure! I did it and it's a huge improvement!

 

[06yamahaapex]

I have just bought a 2012 m800 162 snowpro... I have a bit of cash left over and want to either upgrade the track to a 2.6lug ($900) or go to the 38'' a arms from a 2014 ($500). if you were given the choice which one would you choose. I mainly ride in whistler and its deep.

Will sell you a brand new take off for $800

 

[ThrottleOps]

Do the track! The 2.25 is brutal but that 2.6 sure works well!

 

[calltrex]

Check tracks canada

 

[pinkpantherusmincus]

Ok track it is..... also do you find a need to put aftermarket running boards on at all? how well do the stock ones clear snow?

 

[calltrex]

I dont know if u need them but I just got the boards from racewerx. Saweeet

 

[pinkpantherusmincus]

Caltrex, I looked at those, but i was thinking the bm fabrications one... they are cheaper...

 

[ThrottleOps]

B&m boards are nice! If you have a limited model with powder coated boards u don't need them but if you have bare aluminum ones get the boards!

 

[calltrex]

From the pictures it sits on top of the tunnel edge. So that would raise the boards. I wouldn't like that myself.

 

[pinkpantherusmincus]

bopper yep, its aluminium. i have to call matt from bm tomorrow...

 

[calltrex]

My boards showed up this morning. These are pimp

 

[ThrottleOps]

which boards are those? racewerx or skinz adjustable?

 

[calltrex]

which boards are those? racewerx or skinz adjustable?

Racewerx

3 different heights to set boards I believe

Will start this project tomorrow

 

[ThrottleOps]

nice! have fun the cutting off part is scary but well worth it!

 

[calltrex]

will take some good pics when I'm done. not to bad if u have the right tools

 

[pinkpantherusmincus]

caltrex any more work done?

 

[calltrex]

working on it here and there

had to get my rear mounts powder coated today to match before i could continue

put the bars on tomorrow and decide which height to use. 2 or 3 options

these are looking sweet. can't wait to see done