Which pipe on E-Tec?

[omullinger]

I am looking between SLP and Straightline Pipes, anyone have experience with them? Which one is better etc? Im trying to keep it under 800 (pretty much price of the BRP) due to insurance.

Any help/opinions would be great

 

[kovs]

IMHO wouldnt bother with a aftermarket on a etec, buddy tried all of them on his and has the stock back on - put on 500km testing the different ones and found the bmp y pipe and stock pipe with slp can i believe.

 

[jaredszakacs]

bmp y-pipe and main pipe with mbrp stinger on my etec and works awesome! talk to cory micku at revolutionperformancegroup.com hey will set you up the right way on these etec's! I got this kit on mine with over 1000 km's and it works great! pulls harder than stock thats forsure.

 

[underdog]

I'll sell you a spi pipe. Only has 1 day of riding on it and I decided I preferred the sound of stock pipe. My spare belt holder did fall onto it and melted a little. $350 it's yours.

 

[omullinger]

Going through insurance, so its a pain to do anything that turple can't get in.. BMP was going to be my first choice but they can't get it in

 

[snopro]

Going through insurance, so its a pain to do anything that turple can't get in.. BMP was going to be my first choice but they can't get it in

Do Turple's even carry aftermarket parts?

 

[omullinger]

Almost seems like it

Do Turple's even carry aftermarket parts?

 

[takethebounce]

If you go SLP go with the full set up, y-pipe, pipe and can. Deffinetly adds on the top end.

I don't have any experience with StraightLine's stuff.

 

[snopro]

I run the SPI pipe with an MBRP can and very happy with that setup on my 2012.

 

[cadman22]

I have the SPI pipe and a TSS can on my 2012

 

[omullinger]

Does anyone have a sound clip of them? Because I have heard from 2 people now that they didn't like the sound

 

[takethebounce]

Does anyone have a sound clip of them? Because I have heard from 2 people now that they didn't like the sound

sound is very hard to duplicate on a computer...was it recorded while sitting flat on the snow, exhaust side exposed, mid range, wot, and so on.

 

[scrfce]

my riding buddy also runs a full slp setup, seems to work good and he likes it,,,pulls better, looks nicer, weighs less and definitely sounds a lot better over the stock sewing machine

 

[maierch]

I've had both the SPI pipe and the BMP pipe on my machine. I much prefer the BMP. It seems to pull a little harder but that could be the fact that I changed a y-pipe with it too.

I too have an SPI pipe, carbon fiber can and clutch kit for sale too. Mine doesn't have the remnants of of a belt guard on it though!

 

[snowthing]

Has anyone ran a crank shop pipe and y-pipe on the 2012's yet?