Ive always wondered if a guy could just go dig some out of the coal seams along that highway if you were going that way.
It would work but it wouldn't be that good as the oxygen has gotten to it. You need the proper grade of coal to burn in fire places. Lived in tumbler ridge for a few years and heard of a few stoves burning down from guys bringing coal from mines there and using it. Burns way to hot.
From what I've been told is its oxidized so loses its burnabilty if that's even a word. Not a scientist and neither were the guys at the mine that told me about it. Never tried burning the stuff.
Sounds stupid but couldn't you use charcoal burns hot and for quite awhile.
Sent from my iPhone using my fingers.
Found this you could buy it online lol
Sent from my iPhone using my fingers.
It takes quite a while before that. but yes, there is a reason you have a live pile and a dead(covered by clay and soil) pile and try and keep a good rotation of coal.From what I've been told is its oxidized so loses its burnabilty if that's even a word. Not a scientist and neither were the guys at the mine that told me about it. Never tried burning the stuff.
Just out of curiosity, is the stack for it anywhere close to the hot tub? Natural bituminous coal (the stuff thats in Alberta), when burnt in an uncrushed state with no pyrite removal and without proper fluidization (air/fuel ratio) is going to burn at a lower calorific value. And that leaves you with smokey, nasty pyrite smelling (which doesnt leave, my clothes from 4 years ago still smell like a pyrite fire) burn. Fortunately, the coal in GP is better than southern coal, but still weigh that in before making the switch to coal. You can buy processed anthracite coal that comes from the states with no pyrite content, and really high (around 30,000Kg/Kj) calorific value.Throwing in a wood stove. Specifically, the wood stove that heats hot tub at cabin. Would be easier then constantly keeping a wood fire going at full tilt to get the water to initially heat up after filling the tub. Just throw in some coal and add a little air with fan if it needs it.
It takes quite a while before that. but yes, there is a reason you have a live pile and a dead(covered by clay and soil) pile and try and keep a good rotation of coal.
Just out of curiosity, is the stack for it anywhere close to the hot tub? Natural bituminous coal (the stuff thats in Alberta), when burnt in an uncrushed state with no pyrite removal and without proper fluidization (air/fuel ratio) is going to burn at a lower calorific value. And that leaves you with smokey, nasty pyrite smelling (which doesnt leave, my clothes from 4 years ago still smell like a pyrite fire) burn. Fortunately, the coal in GP is better than southern coal, but still weigh that in before making the switch to coal. You can buy processed anthracite coal that comes from the states with no pyrite content, and really high (around 30,000Kg/Kj) calorific value.
Good to know! I did hear coal smells bad when it burns, but also read that if enough air is provided, it burns clean. The stove can pretty much be placed anywhere depending on how much hose you run.