Whats up ?

[freeride73]

I have a 2016 summit 800 and I'm not hitting 7900 RPM's. I'm at 500m elevation and on clicker 2 ad when I punch it off he line I can hit 8000 RPM's. When I'm going 3/4 throttle and punch it I can only get around 7600. My friend has the exact same sled and he can hit 7900 on clicker 1. It sounds like its not opening up all the way. Any thoughts?

 

[team dirt]

I have a 2016 summit 800 and I'm not hitting 7900 RPM's. I'm at 500m elevation and on clicker 2 ad when I punch it off he line I can hit 8000 RPM's. When I'm going 3/4 throttle and punch it I can only get around 7600. My friend has the exact same sled and he can hit 7900 on clicker 1. It sounds like its not opening up all the way. Any thoughts?

Loose belt, dirty clutches, wore out clutch parts. Deffinetly look at clutches. I would say it's not back shifting smooth and then overloading the engine causing it to lug down. Over a longer distance will the engine catch up and start pulling the rpm?

 

[freeride73]

Clutch just was cleaned prior to last ride. Belt and sled has 650km on them. It never seemed to open up. Belt could be a little down on the secondary. Doo dealer thought they might have to reset the Rave valves.

 

[bingo1010]

try switching belts, put a new one on, i have seen this make a huge difference. easy to do and eliminates one more variable

 

[team dirt]

Clutch just was cleaned prior to last ride. Belt and sled has 650km on them. It never seemed to open up. Belt could be a little down on the secondary. Doo dealer thought they might have to reset the Rave valves.

What about the secondary. When was the last time it was cleaned or looked at.

 

[neilsleder]

Make sure you can just start to see the top of the thread on your coming out of the secondary. That's a bit tight but it think the clutches work better a bit tight.


Sent from my iPhone using Tapatalk

 

[freeride73]

I closed the clutch up a bit. This is what it looks like now.

 

[bingo1010]

that is just fine

 

[neilsleder]

Yah that's pretty good! I would say you got other issues. You got a can on yours?

 

[Depsnolvr]

I would take it to your dealer and have them look at a few things

 

[freeride73]

Took it to dealer and they flashed the computer, reset the rave valves and said I should be ready to hit the mountains! Hope they're right! There is a
bikeman can on it but it's been since new
and ran good.

 

[team-x]

Could be raves, could be timing, could be pin weight in the primary. Its brand new so hopefully the dealer takes care of you and looks at the basics. On the bright side (if there is one) you're not missing epic snow right now, but hopefully its sorted out when we get a new dump.

 

[Joholio]

Took it to dealer and they flashed the computer, reset the rave valves and said I should be ready to hit the mountains! Hope they're right! There is a
bikeman can on it but it's been since new
and ran good.

is it all good now?

 

[Caper11]

Took it to dealer and they flashed the computer, reset the rave valves and said I should be ready to hit the mountains! Hope they're right! There is a
bikeman can on it but it's been since new
and ran good.

Or could be the can.


Sent from my iPad using Tapatalk

 

[freeride73]

I just got back from Sicamous today and my sled ran great! Thanks for all the input

 

[team dirt]

I just got back from Sicamous today and my sled ran great! Thanks for all the input

How was the snow? Looks like a big system coming through tonight

 

[freeride73]

The snow was awesome! Snowed hard 3 dad before we went and reloaded again on Sunday night. It was a foggy Wednesday, but snow was great