Whats my old phazer worth

[deaner]

Does it have the factory air box? They need the air box or will lean out bad. Pods burn them down

It does, but when I had it started it was just the carbs on. Would it make a difference just idling in the shop?

I'm guessing something is still gummed up. I couldn't get the one siphon tube out, and just did a quick hand clean on everything. Just wanted to see if it would run before putting any more time or money into it

 

[deaner]

Build it out. I did one for my kids years ago…Pro boards work perfect.

View attachment 246278

That's pretty sweet. Is that a custom seat, or off something else? I need to do something for mine. The cover and the bottom board were toast

 

[Turblue]

It’s a old apex mountain mod seat I modified to work. I think I used the phazer base and cut the foam. I do have all the Aaen jetting and clutching papers. Also I seen someone is making the cold air intake cowling for them.
https://www.snowandmud.com/threads/1993-yamaha-phazer-141.102826/

 

[deaner]

Well frick.....I pulled the pins for my floats and the hinge broke. Between that, and the siphon tube being stuck (and needs an easy out to get it out....screw head is stripped), I either need another carb or shes back to being a parts sled.

Whats the rest worth as parts? $500?

 

[NoBrakes!]

VMAX flat slides and then no worries?

 

[deaner]

I got that siphon tube out, and it should be re-usable. Does a guy dare jb weld that hinge piece? Ive never had that much luck with jb weld, but this is a pretty low stress piece. Just holds the pin that the float bowl pivots on

 

[struglin]

I got that siphon tube out, and it should be re-usable. Does a guy dare jb weld that hinge piece? Ive never had that much luck with jb weld, but this is a pretty low stress piece. Just holds the pin that the float bowl pivots on

Jb weld it cheap, what do you have to loose?