What did you do for your ATV today?

[rubirose]

Rear skid plate installed, new front boot and the tie rod straight again, got a little bent in Edson last weeked, oops

 

[Andoo]

Put 95km on it in the training area on Sunday. Wicked A$$ time.

 

[camoJoe]

replaced wire rope with Amsteel Blue , no more wire Rope for me, snapped after 5th winch.....

 

[whoDEANie]

replaced wire rope with Amsteel Blue , no more wire Rope for me, snapped after 5th winch.....

Wow, if a steel cable only lasted you that long, you're gonna hate the synthetic line. On the other hand, if you're snapping lines that easily, the synthetic is definitely a much safer choice.

 

[camoJoe]

got wound up wrong the last 3 times most likely, was all "bird-caged" when cable came out the 5th time, was expecting a snap as the Rene we were trying to winch out was in deep skeg, got no control on "reel in" without a remote, another lesson learned !

 

[camoJoe]

installed wireless remote for winch today , should have no issues now

 

[Canam maverick]

Not yet. Snorkel just got finished being buttoned up. Looks like we are heading out first weekend in Oct.

 

[kokanee 800]

put the gun boot on and welded the jerry can bracket , game on bambies.. heading out today.

 

[imdoo'n]

looks like i need to put a drain hole or 2 in the front bumper on the ranger, there are 2 holes on the tube joints that will let mud n water into the bumper with no way to getout.

 

[imdoo'n]

may as well change the front and rear diff oils while i'm at it. 25 hr service,

 

[TylerG]

looked at it, saw its got a flat tire, walked around it to get tools to finish adjusting throttle cable on the girlfriends 550 Polaris.....

will deal with the tire next week, handy having brother-in-law who works at Kal Tire

 

[imdoo'n]

looks like i may need to pull the rear tires off the rims and clean a frew beads, tires are looking a little flat, not because of the cold. may as well put the zillas on if i'm going to all that work.

 

[arff]

It's sitting in the toyhauler ready to go for next Thursday....

 

[09 arctic cat m8]

I loaded up mine today and washed it!!

 

[KWIK RACING INC.]

well had to do some maintiance finally... not that I wanted too but had too...lol had to do rear wheel bearings.. also one side of TTI arm bearings plus clean everything out of the torsion bar area.. no more squeeking when you rock it back and forth... also had to do all the tie rod ends... upper ball joints... bottom A arm bushings ( got UHMV special bushings with 4130 steel pins ) wont wear out like the stock ones.......and replaced the worn bolts in both front shocks in the lower mount to the a arms..... and 4 weeks ago I did new brake pads by Race Driven... got 4100 K out of my EBC's SD's.......8300k on machine now and still going strong! lol

 

[kokanee 800]

broke one of the two bolts for the rear rack and fender again , flipped the tub trailer and bent the **** out of the hitch.

 

[doorfx]

Picked up a set of tires for playin in the muck

 

[imdoo'n]

you going deep?

 

[doorfx]

you going deep?

Lol who me? Just for play lol

 

[imdoo'n]

U need scuba tanks?