- Moderator
- #361
What did you do for your ATV today?
- Thread starter zeebs
- Start date
quadboy55
Active VIP Member
Put 'dat 70HP to some good use!
goodngrubby
Active VIP Member
Got Maxxis Big Horns for it today, they look good. Will mount them tomorrow.
haha, you beat me to them.
youngpolarisguy
Active VIP Member
Pulled the winch off mine today, gonna take it to work and clean and re-gresse it. Two years of being under water alot it getting a little noisey. Ooooooo just saw a rzr go by outside its nice.
Andoo
Respected Military Member
It's asking me where we're going tomorrow and I don't have an answer for it cause I don't want to drive more than 60min to stage
Kelzon
Active VIP Member
Sorry Todd, I was on them within hours....lol He had a list of guys wanting them. I think i got a very good deal ! :d
Kelzon
Active VIP Member
Bought a new belt ( polaris sportsman 800 ) are they easy to install ? Any thing i should do at the same time ? ( and all you polaris haters.....don't say burn it...lol ) Does the belt just slip on ? Thanks for any tips.
youngpolarisguy
Active VIP Member
Pretty simple undo the 4 bolts in the foot well, the clamp on the belt exhaust and the ten or so bolts around the cover, pull the foot well out a bit and out comes the cover. The belt will just roll on and off just like a sled. I do recomend either flip the cover seal around or replace it, sux when it leaks after.
Kelzon
Active VIP Member
Thanks for the advice youngpolarisguy ! Don't have a sled but i think i get the idea. Kelzon.
Last edited:
mudd kitty
Active VIP Member
ponyboy
Active VIP Member
I walked by........... spit on it ...... then looked at the 500 rotax that i want too install..... spit on it too and cracked a
doorfx
Active VIP Member
hadster
Active VIP Member
Got Maxxis Big Horns for it today, they look good. Will mount them tomorrow.
Great choice ,you will love them.
Fallen
Active VIP Member
What did I do my my ATV today you ask? Well I'll tell you.
Since it was sunny as opposed to the forcasted rain/snow. I took ' r for a quick rip on the asphalt. Turns out riding on asphalt is verry different from the soft dirt or sand. In the dirt/sand 4/5 gear have know uses. on the asphalt, first and second gear aren't too useful, just like the front tires. they weren't on the ground.
Since it was sunny as opposed to the forcasted rain/snow. I took ' r for a quick rip on the asphalt. Turns out riding on asphalt is verry different from the soft dirt or sand. In the dirt/sand 4/5 gear have know uses. on the asphalt, first and second gear aren't too useful, just like the front tires. they weren't on the ground.
Brute Force Boy
Active VIP Member
I replaced the rear cv and wheel bearing that I broke a month a go, easy job, put new break pads in the rear as well.
Couldn't get the old wheel bearing out, had to bring it into Kal Tire here in Peace River, they charged me $52 to push the old one out and the new one in. I asked if they had any trouble and was told "nope, came out easy with the press" Maybe I'll try vaseline next time case I took it dry from Kal Tire.
Couldn't get the old wheel bearing out, had to bring it into Kal Tire here in Peace River, they charged me $52 to push the old one out and the new one in. I asked if they had any trouble and was told "nope, came out easy with the press" Maybe I'll try vaseline next time case I took it dry from Kal Tire.
buzzednbored
Active VIP Member
- Moderator
- #379
I replaced the rear cv and wheel bearing that I broke a month a go, easy job, put new break pads in the rear as well.
Couldn't get the old wheel bearing out, had to bring it into Kal Tire here in Peace River, they charged me $52 to push the old one out and the new one in. I asked if they had any trouble and was told "nope, came out easy with the press" Maybe I'll try vaseline next time case I took it dry from Kal Tire.
Copper kote works good.
AreWeThereYet
Active VIP Member
I replaced my front wheel bearings and seals this afternoon,.. just waiting for my cage like yours to get here tomorrow afternoon.
Similar threads
