Vinyl Decking for outside deck?

[pfi572]

Just thinking about installing enclosed deck but would have to cover deck boards .
Have one quote for installing tongue and grove plywood and then covering with sealed outdoor vinyl.
What is a average cost per square foot for something like this ?
Thanks in advance
PS
Not sure how the hell you can change topic location as doesn’t give you a option for anything other then motor sport items.

 

[doorfx]

I’m in the same boat. Just starting to look around at the options.

 

[hdkawi]

6-7 $ a sq ft

 

[Bnorth]

6-7 $ a sq ft

That's about what I was quoted here too.

I am building/expanding a deck off the front of our place that is done in duradeck. I'd rather do a cedar 5/4 deck board but a portion of it covers the basement entrance and can't let moisture through. I am debating doing duradeck on the whole thing or using a rain capture system on the portion that covers the entrance. I don't really like the look of duradeck but the maintenance on it is sooo easy.

 

[sick1]

2.40 sf for 45mil
3.90 sf for 65mil
60.00 drop freight charge
this is for weather deck or euro deck approx 20 patterns or shades
supply only
3.00 sf for install plus prep
Im a distributer. in edm

 

[pfi572]

2.40 sf for 45mil
3.90 sf for 65mil
60.00 drop freight charge
this is for weather deck or euro deck approx 20 patterns or shades
supply only
3.00 sf for install plus prep
Im a distributer. in edm

Thanks so much as this helps big time.
From Grande Prairie so we tend to get bent over .
Want to pay a fair price is all and pay them when completed .
No wait time for payment

 

[Lightningmike]

I am changing my side deck boards. Have dura deck on front and going to put a roof over the side deck. Had rhino decking but want it sealed waiting for a quote on flex stone coating.
I have a 14x12 piece where hot tub goes the it is 8 x 30 from there. A rough estimate for flex coating , labour and install was 5700. Its pricey but done for life.

Will update when I get quote.

 

[Trashy]

Just thinking about installing enclosed deck but would have to cover deck boards .
Have one quote for installing tongue and grove plywood and then covering with sealed outdoor vinyl.
What is a average cost per square foot for something like this ?
Thanks in advance
PS
Not sure how the hell you can change topic location as doesn’t give you a option for anything other then motor sport items.

Can't help you with the deck question, but where would you like the thread moved? Just About Anything Goes?

 

[pfi572]

Can't help you with the deck question, but where would you like the thread moved? Just About Anything Goes?

Thanks Trashy
Yes to “Just About Anything Goes”

 

[Catman10]

I fiberglass decks and have been doing so for 20 years, it is the ultimate solution, looks kinda like dura deck , lasts for 20 years plus, no maintenance, easy to clean and shovel snow off, its the ultimate waterproof solution but I charge about $8-10.00 a square foot depending on the job. I can post a pic or two but I am afraid to because I am quite busy and am afraid to take on more work ha ha, most people that see it want it because there is no equivalent on the market for sure. I have decks out there that are 30 or more years old still doing the job and could use a refresh but that is a pretty cheap investment for that length of time and 0 maintenance.

 

[Tchetek]

I’ve done 2 above grade concrete decks. Been 10 years and not even a crack. Did exposed Finnish but can be finished anyway concrete can.

 

[Couch]

Glass is a durable option. Replaced a torch on with fibreglass. No leaks and good for longer than I'll be around.
If you're handy its not difficult. Prep is key of course.
Lots of products for bonding / bedding posts to it afterwards