Vibration on hardpack over 80 km/hr

Joined
Jan 5, 2017
Messages
21
Reaction score
19
Location
Rocky Mountain House
I’m running a 2013 Summit X 163”. I understand that it is not designed for running fast on groomed trails but I get a pretty noticeable vibration at 80k+. No vibration once I’m up in the snow, can’t notice any visible play on the secondary or the driveshaft bearings. Any ideas? Would a bent drive shaft vibrate only at certain speeds?
 

firstdoo

Active VIP Member
Joined
Nov 21, 2013
Messages
725
Reaction score
1,628
Location
Stony Plain
I’m running a 2013 Summit X 163”. I understand that it is not designed for running fast on groomed trails but I get a pretty noticeable vibration at 80k+. No vibration once I’m up in the snow, can’t notice any visible play on the secondary or the driveshaft bearings. Any ideas? Would a bent drive shaft vibrate only at certain speeds?

Where do you feel the vibration? Footwells, running boards, handlebars?
Could be a driver shaft with a slight bend in it but you would most likely feel it in deep snow when your track speed is up there. You should also check your engine mounts. Make sure they didn’t loosen up or are cracked/broken.
 

tex78

Active VIP Member
Joined
Feb 5, 2010
Messages
17,570
Reaction score
17,029
Location
DA Moose B.C
How about snow in the tunnel melted rubbing on the track

If it was track shaft would vibrate anytime


Also swap out the belt and rule the hour glass on the drive belt out
 
Joined
Jan 5, 2017
Messages
21
Reaction score
19
Location
Rocky Mountain House
I switched out the belt. Feel it through my feet not the bars. Had the chain case open for a service and everything seemed tight and correct. Thanks for the input. Hoping to figure out the problem before I spend a bunch of money!
 

treeboy

Active VIP Member
Joined
Nov 14, 2010
Messages
183
Reaction score
112
Location
The Monashee Mountains
When I bent my driver shaft you definitely could feel the vibration worse going down the trail at a constant speed, not as much up on the mountain.
 

catrutt

Active VIP Member
Joined
Jan 14, 2009
Messages
882
Reaction score
1,352
Location
okotoks
I had two of the bolts on the back of my secondary come loose causing the two halves to run uneven and vibrate foot and handle bars. Easy to see running with belt guard off.
 

Ramjet15x

Active VIP Member
Joined
Oct 9, 2008
Messages
249
Reaction score
276
Location
Leduc
I bent driveshaft on m 13 XM, no vibes in snow, shake like hell on hard pack
 

NoBrakes!

Active VIP Member
Joined
Nov 13, 2011
Messages
6,358
Reaction score
12,967
Location
Edmonton
Friends 13 XM did the same, no idea how the driver bent. Thought it was nothing until the gears/chain/bearings died...
 
Joined
Jan 5, 2017
Messages
21
Reaction score
19
Location
Rocky Mountain House
Thanks for the input guys. I dumped the sled. Looking for t3. Anyone got a low mile one for sale? Have a trip to chatter creek next week that I refuse to miss!
 

Giver800

Active VIP Member
Joined
Jan 12, 2015
Messages
182
Reaction score
143
Location
Airdrie
Thanks for the input guys. I dumped the sled. Looking for t3. Anyone got a low mile one for sale? Have a trip to chatter creek next week that I refuse to miss!
My cousin has one. 2016 174 t3 with 1100 miles but we plan on taking it for a ride tomorrow so it will be more when he sells it. I think he has it listed for 8500 firm. Located in Airdrie. Send me a pm if you want more info and pics.
 
Top Bottom