krazy k
Active member
Like the title says- looking for under deck rolling platform for under a sled deck. Any suggestions? or ideas?
Under deck rolling platform
- Thread starter krazy k
- Start date
I had a bed slide in a truck with a diamond back cover. It was decent. But it doesn’t like 30 km of highway with it left our extended while loaded.
but you would need pretty skinny luggage to have it under a deck with your ramps in.
but you would need pretty skinny luggage to have it under a deck with your ramps in.
Rbrduk
Active VIP Member
Rolling bed makes a good product.
- Admin
- #4
https://truckbossdecks.com/shop-category/accessories-truckboss/smartboxx/
I have this and it works great
I have this and it works great
Attachments
Last edited:
I use the free version, I leave my 5th wheel rails in and then cut a piece of plywood down to fit between the two, built a couple jerry can holders, handles to push/pull in. I cant load too much since its not on wheels but cost me nothing to build and keeps jerry cans from sliding around. I send a picture in here when I have my truck out.
Dragonalain
Active VIP Member
I have the Truckboss one works great. Still able to have tall items at the back as I run the short ramp on a long box.
Sent from my iPhone using Tapatalk
Sent from my iPhone using Tapatalk
- Thread starter
- #7
krazy k
Active member
I'll have to check to see if truck boss just sells the rolling box thing. Thanks everyone
Dawizman
Active VIP Member
I have the truck boss smart boxx as well. Works great. This is my second one (upgraded to an 8 foot box), and both have had the same problem after a season or two. The drill point screws you put them together with fall out. My solution - replace them all with rivets. Never an issue after that.
- Thread starter
- #10
krazy k
Active member
Seems like the place in Edmonton that sells the truck boss rollers has either moved or i am missing something? Does anyone know where they may have moved too?
Dawizman
Active VIP Member
The company was sold and moved to the US several years ago.
The only dealers I'm aware of are freedom powersports in Edson or Prairie Rec in PA.
- Admin
- #12
Freedom doesn't sell them anymore either last I heard.
Dawizman
Active VIP Member
I can understand why. The prices are pretty insane compared to other high quality decks.
I've ordered my smart boxxes direct because even after shipping it was still 30% cheaper than buying "local". I get all my parts direct as well. They have been closer to 50% cheaper than when I called around. My take is that they aren't giving the resellers much margin to work with.
When I got my first truckboss deck they were still based in Edmonton and everything was very reasonably priced. Moving to the states and covidflation really changed that.
- Thread starter
- #14
krazy k
Active member
Well that sucks. Now I'll have to look at building something then
- Admin
- #15
I would reach out to Maxwell. I think he still puts something like it in his survey fleet trucks for work. He may have some infoWell that sucks. Now I'll have to look at building something then
- Thread starter
- #17
krazy k
Active member
I go to Regina once in awhile. But I will see what I can find around Edmonton, thanks.
sirkdev
Active VIP Member
rolling cargo bed
try that on FB there is quite a few
try that on FB there is quite a few
vodoo103
Active VIP Member
Here's one that just showed up on the book of faces - Red Deer area
www.facebook.com
Log into Facebook
Log into Facebook to start sharing and connecting with your friends, family, and people you know.
www.facebook.com
LID
Active VIP Member
I have the sliding truck box one, not the rolling one. Saves a few inches of height for getting Jerry cans under the ramp
