Turbo XM Won't Start

NeilV

Active VIP Member
Joined
Jan 4, 2009
Messages
203
Reaction score
470
Location
Busby Alberta
So I rode my turbo for the first time today and it ran great all day. Had a blast and everything seemed good and then when we were going to start heading down, out of nowhere I got a low voltage error on my Afr gauge and the sled died and would not start. Had to tow it down. Only thing weird today was at one point my gauge was showing 0 rpm 0 elevation and neither needle was moving. Popped the gauge out and the connection was tight but when I put it back together it all worked again. Thinking maybe the gauge lost ground and blew my coils? Anybody see anything like this before?
 

NeilV

Active VIP Member
Joined
Jan 4, 2009
Messages
203
Reaction score
470
Location
Busby Alberta
Just the one under the oil tank...

Sent from my HTC One using Tapatalk
 

Rfbot

New member
Joined
Dec 3, 2012
Messages
2
Reaction score
0
Location
Stockholm, Sk
Ground runs through headlight/guages if you had a poor connection or plug came loose could have fried ignition solenoid.
 

snowseeker

Active VIP Member
Joined
Dec 12, 2007
Messages
1,379
Reaction score
569
Location
Fort Saskatchewan
its your coils. It has happened to a two of my buddies and it was coils In both cases. take it and get it tested but I would bet it will be coils. They are so sensitive and that's why we carry spare coils in the trailer.
 

drew562

Active VIP Member
Joined
Mar 13, 2008
Messages
5,588
Reaction score
21,873
Location
edmonton
2 of my xms lost coils and stators. On one machine it happened twice
 

NeilV

Active VIP Member
Joined
Jan 4, 2009
Messages
203
Reaction score
470
Location
Busby Alberta
So the dealer just told me that it was a bad gauge, but they said the only reason that the coils went is because of the fuel controller for the turbo. So on a stock sled can you run it with the gauges disconnected?

Sent from my HTC One using Tapatalk
 

mountainsledmania

Active VIP Member
Joined
Dec 28, 2009
Messages
1,187
Reaction score
1,231
Location
sherwoodpark
fuel controller and coils are not linked in any way as far as i know. fuel box controls injectors only ... correct me if im wrong.

So the dealer just told me that it was a bad gauge, but they said the only reason that the coils went is because of the fuel controller for the turbo. So on a stock sled can you run it with the gauges disconnected?

Sent from my HTC One using Tapatalk
 

NeilV

Active VIP Member
Joined
Jan 4, 2009
Messages
203
Reaction score
470
Location
Busby Alberta
The dobeck does piggy back into the coils.

Sent from my HTC One using Tapatalk
 

NeilV

Active VIP Member
Joined
Jan 4, 2009
Messages
203
Reaction score
470
Location
Busby Alberta
uploadfromtaptalk1418879398410.jpg

Sent from my HTC One using Tapatalk
 
Top Bottom