Tunnel Braces

[Rene G]

Hey everyone, I'm looking for some advice on tunnel bracing after discovering some damage with no impact or reason for there to be any damage. The sled is a 2015 Pro RMK with just under 500mi on it. What does everyone recommend as far as bracing and who makes the braces?

Thanks in advance.
Rene

Sent from my iPhone using Tapatalk

 

[TDR]

You could try Daryl at DOC Performance in Edmonton as I believe he makes them and then powder coats them whatever color you like.

 

[OnlyPolaris]

i put the van amburg braces on my 2013. the left side just mounts over top of the stock brace and the right side replaces the existing brace. I glued the new plate with the polaris glue before i riveted it on. first pound the damage straight again. never had an issue with the sled since. i got them from chris at parkland motorsports.

 

[Rene G]

OnlyPolaris, which brace kit did you use? They have a couple on the site.


Sent from my iPhone using Tapatalk

 

[polaris011]

I had some made at laserman cuts in red deer ... awesome place to deal with and u can get it done pretty cheap I have full length tunnel brackets on my sled as my last one I destroyed so I put these on to prevent the tunnel from crumbling

Sent from my SM-G920W8 using Tapatalk

 

[BIGHORN1]

i put the van amburg braces on my 2013. the left side just mounts over top of the stock brace and the right side replaces the existing brace. I glued the new plate with the polaris glue before i riveted it on. first pound the damage straight again. never had an issue with the sled since. i got them from chris at parkland motorsports.

X2 give chris a call

 

[OnlyPolaris]

OnlyPolaris, which brace kit did you use? They have a couple on the site.


Sent from my iPhone using Tapatalk

i got the ones in the pic. I didn't want to have to mess with the bulkhead. also have a set on dads sled with great results.

http://vanamburgent.com/files/2013/04/OVERLAY-SET.jpg

 

[XanderKane]

I bought these when I bent my tunnel. Exact copy of the Van Amburgent plates for a lot less. Ships out of Ontario. Great guy to deal with. He also makes full length tunnel braces too. Both must haves.

RTD Bulkhead Brace Kit - 2011-2015 Polaris Pro/RMK | snowmobiles parts, trailers, accessories | Calgary | Kijiji